Search results

  1. alldodge

    Speaker switch?

    Looks good to me
  2. alldodge

    Carb or worse?

    1-3-4-2 is correct No reason for it not to run, unless valves are to tight maybe. Is compression good?
  3. alldodge

    Mercruiser 3 button trim switch

    That is the first Gen dual acting solenoid. Probably needs replaced or converted to 2 solenoids
  4. alldodge

    Confirmation on water pump leaking affecting cool fuel

    If the battery has a shorted cell (seeing 11V) then the ALT is unable to keep things working correctly. When running you should see close to 14.5V
  5. alldodge

    2010 Volvo Penta 5.7 GIE Idle Air Control

    Its item 2 on the Throttle body https://www.marinepartseurope.com/en/volvo-penta-spare-parts.aspx?Catalog=7744410&Category=25&View=9691
  6. alldodge

    4.3 GXi-J with DPS-A howling sound

    I would be looking at the drive Correct fluid used and at level?
  7. alldodge

    Will it fit?

    Look for a welding shop, many do mobile. Don't know what kind of axle, but mine was round and had a issue. Used a portable band saw to cut it off, then welded the new spindle on
  8. alldodge

    3.5 hard drive

    I've got the shop desk top with SATA. Pulled the data cable and the power adapter out of the home puter. Will go to it and see about getting the 3 files I need Go figure, I have a RAID 0 setup and a auto backup. My mistake was putting those 3 files on the desktop and not on the documents...
  9. alldodge

    3.5 hard drive

    The home computer went died really quick. Need to power up the serial ATA western digital 320GB drive (BTW this is a RAID 0 so 2 drives). I connected my USB hard drive adapter to the drive and it would not spin up. My guess is the USB does not output enough power to turn the drive on. Worst...
  10. alldodge

    Will it fit?

    If it fits a 21 foot boat your good, but if its 21 feet long, probably not
  11. alldodge

    1997 Carbureted 4.3 GLPLKD Altenator Wiring

    Don't think that's right
  12. alldodge

    Confirmation on water pump leaking affecting cool fuel

    No Cool fuel is a bad attempt to cool the fuel down to reduce vapor lock. A small leak would not be an issue with fuel temp increase. About 99+% of the water going thru the pump is to cool the motor and exhaust. With motor temps rising and also oil pressure rise, I would look at electrical...
  13. alldodge

    Setting a 2010 cobalt 232 on a trailer

    With the marina folks agreeing to help adjust, your good
  14. alldodge

    5.0 Litre GXI Going Into Limp Mode

    Good to know, thanks Also, what is your serial number?
  15. alldodge

    Setting a 2010 cobalt 232 on a trailer

    Yes, moving in will raise boat, could ask shorlander about it and they could advise Having on the stringers is good, but I wouldn't worry to much about it right now. My guess is it will be real close if not dead on, the boat isn't that wide. Once you get it home you can see how it goes. How...
  16. alldodge

    Setting a 2010 cobalt 232 on a trailer

    Rollers sticking out is not an issue Need to adjust the spacing of the rollers so the keel doesn't contact the cross members. Beam is 8' 6" Your boat has a 21* deadrise and I'm unable to find specs for Cobalt. So you have 21* at the bow and maybe 10* at the stern
  17. alldodge

    Delco EST High Idle

    It doesn't have a return spring so to speak like on a car. Adjust the cable so it just slides on, then remove and add one additional turn to apply a little pressure holding it closed
  18. alldodge

    Adding a House Battery to Bayliner VR5

    Actually with what your listing 12AWG would be good enough, but 10 allows for expansion later
  19. alldodge

    Got the wife a new RAV4 Prime

    Nice
  20. alldodge

    2003 Volvo Penta 3.0 GS Belt Tensioner

    The belt tensioner's are high and its not just VP. Can find them on this side of the pond for less, but still $160 or Pound 118 https://www.ebay.com/itm/223195846435
View older results
Top