Search results

  1. alldodge

    Gimbal bearing dimensions

    the .090 shave was done for X, XR and XZ Bravo drives
  2. alldodge

    Gimbal bearing dimensions

    Was the old bearing installed backwards maybe? Is there a dot on the bearing, should be yellow?
  3. alldodge

    tilt trim system

    Look close at the drawing and it shows two 50 amp fuses. This is a cut away of the drawing in your other thread
  4. alldodge

    2000 Volvo Penta 5.7GSi PEFS still running rich!

    As before, just my opinion, and who knows John may be able to do something. Could be he might get into the fuel tables, or reload a known good one. In link below John does discuss the differences with the 099 and 999. Eddie Young also discusses and he was the one which built my motor and...
  5. alldodge

    2000 Volvo Penta 5.7GSi PEFS still running rich!

    Opinion: Bob at OBD has been testing them for much longer then John. As before John loves to talk and for him there is no one that is better then him. That said, IF the ECM is causing the injectors to stay on to long, I don't see how that can be tested. The ECM is pulsed and a reading is...
  6. alldodge

    need drainage advice

    Either needs a drain or build the area up at a slant so water runs out From the looks there might have been a option for a windless
  7. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    No, no You have to post on OSO site not here
  8. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    You need to post 10 times to post pics. Your at post 4 now. write post 5 and submit write post 6 and submit Continue until you have a post count of 10. Once at 10, you can upload pics
  9. alldodge

    Installing a new asphalt driveway

    your funny
  10. alldodge

    tilt trim system

    It comes from the starter post to a fuse or breaker The drawing shows it from your other post
  11. alldodge

    Gimbal bearing dimensions

    The bearing should be the same size. I'm not understanding
  12. alldodge

    New switch panel wiring

    What do the switches control other then a bilge pump?
  13. alldodge

    2003 4.3 MPI Mercruiser Problem

    Water came from somewhere, hope it can be found before going back together
  14. alldodge

    no spark , Please help

    The distributor just opens and closes the points. If points are opening and closing then the distributor is working. The coil get powered on the + side, the points close the - side. If there is power to the coil and points are opening and closing then there should be spark
  15. alldodge

    35A Fuse

    VP helps, know which VP 4.3 as in GXI, GS, GL etc, serial number would help more The issue is being on the starter is the issue. Might be the instrument harness fuse, but most times those are on the motor. Is it a push button or blade fuse? Post a pic
  16. alldodge

    Dexoleum

    Have not heard of it, but did find it mentioned on old sail boats Could do it like we did it in the USCG. Mask the area that needs the coating. Put down a thick coating of paint, then sprinkle sand all over. Once dry, sweep off and its good to go
  17. alldodge

    Power Trim not moving at all. Help!

    You need a wiring diagram to be able to see how its wired. To test you need a voltmeter and maybe a jumper wire to bypass a relay if needed. If unable to understand the wiring, then need to find someone who does for help. Red is 12V hot When red connects to small blue going to up relay, it...
  18. alldodge

    Trailering

    If it not going to make incorrect contact then I would not worry. Measure boat and match to trailer
  19. alldodge

    Overhauling my 1988 Alpha One Drive Train

    Agree, but I'm not seeing the nut in the pic above. My pic of the Bell above came from Manual 6 My eyes are not seeing to good some time so maybe I'm missing it
  20. alldodge

    Replacement Leaf springs

    It might be a 30 inch spring, since there is weight on it and its stretched out some. I would suggest call one of the places and ask. Most of the places I'm looking at go up to 30 inch. None list a 33 and one list a 32
Top