Search results

  1. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    I'm unable to say, but asked guys who should know on OSO https://www.offshoreonly.com/forums/do-yourself-boating-budget/370776-350-sbc-cam.html
  2. alldodge

    Motor not staying primed after 2 hours

    That would be the key from me also The primer bulb should pump up hard for the first start, once the motor is running the bulb should not stay hard. The fuel pump should be able to suck/pull fuel from the tank without issue. Boat probably has a mai tank and not a portable type. Remove the...
  3. alldodge

    Mercruiser 6.2L Bravo 3 I/O alignment problems

    Put your fingers in the bearing and rotate to see if it feels silky smooth. Next try to move the bearing around (tilt it) with your fingers, can this be done? If unable to tilt, this would be good. Place alignment bare in and see if it will go in by moving the bar around
  4. alldodge

    Power outlet

    Grub, you beat me to it, was about to post that :D
  5. alldodge

    Power outlet

    Coffee maker is 600-1200 watts, depends on which one you get Probably a 1500 would be best
  6. alldodge

    Power outlet

    Phone charger can be run off a cigarette lighter socket and an adapter on a 15 to 20 amp line. https://www.amazon.com/Compact-Car-Socket-Power-Adapter/dp/B002HQYM5E A coffee pot needs a lot more power. Will need a dedicated battery and an inverter. If your pontoon uses a outboard then your...
  7. alldodge

    Replacement Leaf springs

    Post a pic of what you have so we can get a better idea of your question
  8. alldodge

    89 Rinker Restore: Seeking suggestions for new SBC350

    Don't need a 750 CFM carb for a SBC, its more carb then the motor can use. Only need 600 CFM like a Edelbrock 1409 Don't need a cooling crossover pipe, just a circulation pump The distributor listed is for a TB 4 or 5, don't need a ECM need a TB module, or change to Delco EST If your old...
  9. alldodge

    2007 Baja Islander 202

    There are core plugs on the rear of the block. One of them has rusted out or pushed out. Will need to pull the motor and remove the bell housing to find out
  10. alldodge

    Mercruiser 350 mag MIE ECM

    As before, post a pic of the ECM Has the distributor cap been changed?
  11. alldodge

    Mercruiser 6.2 whining noise

    If the pump does start to whine then it might have a hard time getting fuel, check the antisiphone valve. When the key is first turned ON, that would be the pump
  12. alldodge

    Mercruiser 6.2 whining noise

    Unable to discern the noise, but saying it was on the port side and having a 6.2, I would say its probably the fuel pump
  13. alldodge

    New switch panel wiring

    Need more info, Blue and Yellow wires is not enough
  14. alldodge

    Overhauling my 1988 Alpha One Drive Train

    First New style has nut on front of the Bell, and old has the nut on the rear of the Bell. With your nut being on the rear then you have old style. Yes, but there is a BUT The entire cable (core and jacket) will come out, but you need to have a string attached to the outer jacket to get it...
  15. alldodge

    Trim fuse keeps blowing.

    Fuse blows from something drawing to much current. In this case the most likely item is the pump motor. Might fix it by taking it apart and cleaning, or send it out for rebuild/cleaning. Moisture and electric motors don't work well together
  16. alldodge

    Merc 4.3 CR and Quench

    Being a few different non-V heads, only way to know the volume is with a casting number, outside of measuring with the head removed
  17. alldodge

    I/Os in salt water...

    Its the same thickness as the rest or the hull. Fiberglass mat and resin are layed together in a mold. Once dry the hull is removed from the mold and then gelcoated In many cases its a tad thicker in the lifting strikes area
  18. alldodge

    Need a part number that I cannot find

    Appears they are the same page 78 and 79 Plug - 33260-0050M Gasket - 33260-0060M https://www.nissanoutboardparts.com/Parts%20Catalogs/NISSAN/2-Stroke/Parts%20Catalog%20NS50C-60A-70A2%20%20(1992)%20-%20(M256B).pdf
  19. alldodge

    Merc 4.3 CR and Quench

    What's your head casting number? Hey @Scott Danforth
  20. alldodge

    Bought a new boat..loooads of questions LOL

    Being slipped, check your anodes on the drive
Top