Search results

  1. alldodge

    U joint crossreference for new style GKN

    Don't know of any cross in the auto world, just Sierra 18-6406
  2. alldodge

    Oil filter??

    Yes or equivalent Merc 866340Q03, Wix 51043 Search ph30 cross reference
  3. alldodge

    Mercruiser 5.7 MPI Horizon oil change - unable to extract all the oil

    Not very familiar with the 4.5, and this may need a call to Merc to verify. It could be to get all the oil, it needs to have a smaller tube pushed down inside the dipstick tube Maybe @muc might have a better idea. Do you have a serial number
  4. alldodge

    2007 3.0 TKS not getting power?

    From the 50 amp breaker there will be a smaller red/purple wire which goes to a 20 amp fuse. After the fuse it goes to the temp sensor and then the TKS module. The fuse will just be a small rectangular item and one end is a cap which covers the fuse The first is a block diagram
  5. alldodge

    3.0LX Carb Kit

    Look on the side of the carb and see if 807504A1 This should be your Merc carb model number and then use it to search for Merc rebuild kit and find that number or the new carb part number 3310-8M0045397 Kit number is 3302-804844002
  6. alldodge

    Vessel View Installation

    VV has a a system link which SC uses to connect to other items such as speed and temp sensors. The system link is on the 14 pin connector. As you know the 10 pin is the CAN network and 14 pin is the Merc. Everything I'm finding requires the gateway to convert the info. Call or email Merc and...
  7. alldodge

    Vessel View Installation

    Going from smartcraft to Lowrance and the 10 pin CAN connector would mean your using NEMA 2000. This would have me thinking you need the smartcraft gateway. Smartcraft just takes SC so it needs something to convert it to something the Lowrance uses. AT least that is my understanding...
  8. alldodge

    Engine cut out while slowing down....

    While it can get ripped thru, most are not, the head warps just enough to let gasses pass
  9. alldodge

    Engine cut out while slowing down....

    Look at your last pic and note between the middle cylinders is shinny This points to the location that for me it appears the head gasket blew
  10. alldodge

    Vessel View Installation

    Have a look at this and then ask questions
  11. alldodge

    Sea Ray 220 BR Remodel

    1. You can but your going to need more tools. I would suggest a vibrating saw, with a lot of blades. I use the half moon bi-metal ones 2. Either a sander, grinder and a vibrating saw 3. There is a possibility to get drawings from Searay, but most just save what they can of the stringer, lay...
  12. alldodge

    Chunks on Spindle

    I would lean toward just replacing the axle, but it can be fixed. Wire wheel is not going to fix it Find a place which just sells the spindle and then a welding shop. The shop can remove and install the new spindle.
  13. alldodge

    Ratios

    Yes, if both drives are standard gearing. The standard B3 drive gears are 32/27 upper for both 2.0 and 1.65 18/25 for 1.65 16/27 for 2.0 So if you change out the gears, you would have the original 2.0
  14. alldodge

    Ratios

    Going from a 2.0 and 26P props to a 1.65 drive, your going to need to drop the prop pitch to about 21 Even dropping to 21 your hole shot will be reduced because the motor doesn't develop the torque until the RPMs get higher
  15. alldodge

    Neutra Salt System

    Hey @Scott Danforth
  16. alldodge

    High Idle After Overheat - 454 Mag Bravo Gen V

    With it getting that hot something may have warped, but could be carb is not returning all the way back. Remove the throttle cable to see if that helps. It does look like your motor came with a Q-jet. Does it look like this
  17. alldodge

    help with running surge brake lines

    The first union doesn't have to be a Tee, it can be a female coupler. Just need the flex line on the other side going to the axle Tee
  18. alldodge

    Bravo 3 Sea Water Pump - What's this?

    What is the complete number on top the fitting? Something 04
  19. alldodge

    Bravo 3 Sea Water Pump - What's this?

    You said Don't understand the spring clip The motor has an option to install a fresh water flush Tee fitting. Without the Tee, then there might be just a barbed fitting to join the 2 hoses. That said; your pump has drain fittings on entrance and exit to/from pump to drain water
  20. alldodge

    165 L6's out of the bertram. What do they need?

    Shielding around the brushes and solenoid is sealed
View older results
Top