Search results

  1. alldodge

    Volvo Penta 5.7GSI PEFS ignition control Module

    Yes, But The issue with buying from Amazon is even Amazon doesn't back the product. There has been many knock off parts which have issues. Not saying the seller in the link is one of those, just something to think about
  2. alldodge

    2005 rinker captiva 212 rx1

    Always good with those caps to keep one onboard, they can go bad and look great
  3. alldodge

    Drain points on 1984 GM 5.7L engine on 1984 Chapperal stringer

    Howdy Have not seen folks list small and large caps. There would be 2 block drains and the maybe 2 exhaust drain plugs. If you can provide a serial number I can look closer to what you have possibility
  4. alldodge

    Corpus Christi TX

    My sister lives on a 52 footer in Galveston My guess is there isn't a port in the USA that doesn't have something along the water
  5. alldodge

    Automatic bilge pump

    Sounds like with on/off only you should be setup this way The alarm is not there in your case, but not it has 2 fuses
  6. alldodge

    REV sound when coming off plane (Alpha 1 Gen 2, Mercruiser 4.3L 1993)

    Last time I bought gimbal bearnings, I got them from bearing supply in Louisville. One is Link belt and other was Timken. Buying on-line is a crap shoot, so unless your buying Timken, FAG, Link Belt then I would buy Merc or Volvo Penta I try to stay away from Sierra
  7. alldodge

    Cleaning O2 sensor

    Not an OB guy but maybe my comment will bring them in You don't want any kind of moisture near a O2 sensor. The carb cleaner may not totally burn off before it gets to the sensor, and if this happens it can damage it. What kind of problem are you having?
  8. alldodge

    2005 rinker captiva 212 rx1

    Always best to give us a serial number Being a 2005, there is a chance you have the flat style cap (HVS) which most call a crap cap. If this is the case then they are the same as auto To be sure let us know what you have
  9. alldodge

    REV sound when coming off plane (Alpha 1 Gen 2, Mercruiser 4.3L 1993)

    Grease in the bellows is of no issue or concern. Your bearing feels fine then it should be good. My 1995 Rinker still has the original bearing in it
  10. alldodge

    Fuel line thread size

    To me it appears to be 1/2-20 inverted flare by 9/16-24 https://www.carburetor-parts.com/Fuel-Inlet-Brass-Fitting--90-10B_p_3068.html There are 2 other Q-jet fittings but yours should be a webar/afb https://www.carburetor-parts.com/Brass-Fittings_c_1305-2.html
  11. alldodge

    Ford to Chevy Shiftplate Relocation

    Ahhhh, should say if he had "newer design" Merc mans and elbows :D
  12. alldodge

    Considering a swap

    Get 1996 or newer 5.7 and they will be vortec motors, each will develop more HP
  13. alldodge

    Warm Start issues... HELP!!!

    I think your flooding, and if so the carb would be the issue Look at the carb throat when running
  14. alldodge

    Gas/oil sheen run-off from motor

    This isn't your carb but shows location to look
  15. alldodge

    Gas/oil sheen run-off from motor

    Thanks, Lou has it, need to rebuild your pump
  16. alldodge

    Gas/oil sheen run-off from motor

    Post vids to youtube then link here
  17. alldodge

    Slow Trim Up on 3.0 Mercruiser Alpha 1 Gen 2?

    10w30 or 5w30 is good, Reg or syn May need 1 to 2 quarts, but depends on how much you flush out Can leave the cap off while bleeding and just up to where the 2 halves are joined together at the tank
  18. alldodge

    Changing Chrysler i/b to Chevy i/b process

    Water is a trans and gear box. If your boat has both a velvet and a Walter trans that would be new for me. Not saying it doesn't, just would be new to me There are places that will build a reverse rotation motor, but the thing that make a LH to RH is the cam. You can take a standard LH motor...
  19. alldodge

    Ford to Chevy Shiftplate Relocation

    BT was talking about that your motor uses a reverse lock out for the drive. Its part of the the shift plate to keep the drive from coming up when put in reverse. If the trim system was changed you could use the newer shift plate
  20. alldodge

    Gas/oil sheen run-off from motor

    Look down the throat of the carb when its running and right after its shut down to see if your seeing excess fuel
Top