Search results

  1. alldodge

    Roughing In Front Motor Mounts Location Question

    So we don't know the difference between this dimension but guess its not that big a deal because the length of the mount stud. Its a SWAG
  2. alldodge

    Volvo 4.3 Timing

    What I found http://boatinfo.no/lib/volvo/manuals/nc_elect.html#/16
  3. alldodge

    Volvo penta 5.0

    Howdy Its a GL-B See items 33, they are diodes and may have opened up Happen to have a voltmeter to measure voltages? Do you know if the pump is running or not? Measure voltage on the small Yellow/Red wire on the relay while cranking. You should get 12V while cranking, if not trace the wire...
  4. alldodge

    Mercruiser 5.0 losing RPM

    To pest the pump, need to place a Tee in between pump and carb. Can make the Tee up with fuel line and fittings or buy one (Merc 91-18078). Use a vacuum fuel pump tester (might be able to rent one) https://shop.advanceautoparts.com/p/...E&gclsrc=aw.ds
  5. alldodge

    Can't suck water since winterizing

    Don't see the thermostat being why its not pumping water Look at the hose routing on the raw water pump. Motor turns clockwise facing it. If hoses come in from starboard side the intake is on top If hoses come in from port side the intake hose is on the bottom
  6. alldodge

    85 rinker omc 3.0 and omc outdrive

    Might be a bad relay, check circuits first
  7. alldodge

    Thunderbolt IV ignition problem

    For now year is good enough. Use this to troubleshoot. and this way you can be back at the motor when testing. Can make it spark by rapidly touching Wht/Grn wire to ground. The TBV is same as TB4 with troubleshooting
  8. alldodge

    Mercruiser throttle/shift control hard to get into neutral...

    Your shift interrupter switch is not working The switch should make the motor stumble so the dog clutch unloads and it can then be easily shifted. Without the switch working, its real hard to take out of gear. What sounds like is happening, your pulling hard and when the dog clutch does...
  9. alldodge

    Issue after coupler install

    Boat will start, thats good to know Look over by the starter connections for a wire not connected Your accessories are not working. The trim gauge has a connection which would be near the trim pump, there are 2 wires with bullet connectors. One goes to ground and other connects to...
  10. alldodge

    Mercruiser turns over, doesn't start unless I pour gas in the carb...

    Having a Merc carb it will have a filter behind the large nut. Remove the nut and check the filter. If filter is plugged, depending on the replacement type will depend on how its installed To get the correct carb kit, look for a tag on the carb with a number
  11. alldodge

    Bildge pump wiring Bayliner 245

    I'm looking at a pic and don't know which side is which. I'm going to assume that the wires with the marker on them comes from the pump and float side
  12. alldodge

    Bildge pump wiring Bayliner 245

    More then likely its wired this way, and disregard the alarm if you don't have one It could be this way but doubtful
  13. alldodge

    OMC 5.0 FORD 302 firing order.

    Thanks Kenny, didn't know that, so looked it up In 1994 the 5.0 HO came out
  14. alldodge

    OMC 5.0 FORD 302 firing order.

    yes
  15. alldodge

    Volvo Penta 4.3GL Water Pump slipped off while on the lake

    The snap ring is missing which holds the bearing in place. That said, the bearing is pressed on the shaft. To rebuild the pump the pulley on the motor has to come off. Your pulley is still on the motor. Look at this vid and it should explain how its done...
  16. alldodge

    2003 Glastron sx195 4.3 Volvo Penta won't crank

    Who winterized the boat?
  17. alldodge

    Does Youth even care

    Daughter works for a Large High end Apartment complex as office manager. Covid hits and she must continue to work, face to face filing forms. Health Dept notifies Company she was exposed so has to quarantine. Forget how long but almost 2 weeks based on when exposure happened and when she was...
  18. alldodge

    Mercruiser 5.0 MPI overheating

    Bravoits is when the inlet water hose swells and collects crud so flow is reduced. It normally doesn't happen in fresh water, mostly in salt. Its the connection at the transom The retrieve the flapper, get a grabber...
  19. alldodge

    2007 volvo 4.3 GL-G - Power Steering Issues

    I don't but maybe someone else does, just have not looked into them The GM is just the regular saginaw power steering pump. See if the pump is just the GM pump, and if so its held in place by the pressure regulator valve. If this is the case, remove the pump and pick one up at the auto store...
  20. alldodge

    Mercruiser 5.0 MPI overheating

    These easy drain systems are great when new, but over time they have some real issues. IMO wish they never would have developed, but I digress The primes is restrictors and check balls allows everything to fill with water, and those restrictions cause water to flow in the correct directions...
Top