Search results

  1. R

    What is this piece from my remote control

    Post picture of control box , and 3 more pictures of this broken part.
  2. R

    evinrude carbs

    There is an issue with the float / float valve.
  3. R

    1970 evinrude lark 40

    Nope----The electromagnet did not move.----The electromagnet exerted a pull on a wrap spring.----That spring then grabbed on a drum attached to the gear.----Simple as could be !!
  4. R

    1990 150 HP V6 Leak Down Fail. Help!

    Boyd----On that motor the oil would be mixed with the gas before going into the carburetors.----No different then mixing yourself at 50:1 in your tank.----So why your last statement in post #21 ?
  5. R

    Engine won’t start when I switch spark cables from cylinder 2 and 3 (3 is currently not firing)

    Test sensor coils.-----Yes powerpack could fail on 1 cylinder.
  6. R

    Question: 1957 18hp Johnson

    Beagle----I think you will find that bearings / crankshaft on the 24:1 model 57 are the same as say a 1967 model 20 HP.( same motor ).----That throws your improved bearing theory out the window.
  7. R

    Unknown 55hp Johnson boat restoration

    Motor is shifted by oil pressure.-----Oil pressure develops when motor is turning.----Remove sparkplugs.----Put control in neutral.-----Turn key to --" ON "----Turn flywheel with 1-5/16" socket.------Motor should shift to neutral in about 1 turn.----( YES one turn )----Put control in...
  8. R

    Buy a boat with a bad starter?

    You often see it in November / December.-----Boat is for sale and has been winterized.-----Will not try and start it for you as it is winterized.-----Also means , good luck with it in the spring if you buy such a unit.
  9. R

    Engine Identification?

    Your location ?----I am not offended at all.----I believe it is a 1976 model.---I think they were great motors back then.-----Might even have 1 or 3 in my collection too.----Certainly lots of parts for one.-----And yes if it had been stored inside on a rack it could be as good or better than a...
  10. R

    Engine won’t start when I switch spark cables from cylinder 2 and 3 (3 is currently not firing)

    Cylinder not firing.-----Could be no spark. ---Or too much fuel.----Or no fuel.---Or no compression in the cylinder.----Or no compression in the crankcase.-----Does spark on all leads jump a gap of 3/8" or more on a test device , yes or no ?
  11. R

    Looking for info on Power Products 1.5hp?

    Repaired a lot of those on lawnmowers 50 years ago.-----A Tecumseh product I believe.
  12. R

    76 Mercury 850 runs good on muffs but wont accelerat much past idle in water

    They all sound good ( bark and roar ) on a hose.-----In the water open the low speed mixture needles 1/8th turn at a time .----Bogging might go away.
  13. R

    Buy a boat with a bad starter?

    A bad starter indicates they had trouble starting it.----Burned it up.-----Or perhaps boating newbies that did not read the manual on how to start the motor !!
  14. R

    Engine Identification?

    Last 700 LB load of clean aluminum I got $0.56 per lb.
  15. R

    Can't get the remote control open

    Thought so.------A 1980 model !!----Determined by the----CS----In the model #
  16. R

    Can't get the remote control open

    A Javelin from the late 1980's ??----Model # is ?-----Those screws would have a 1/4-20NC thread.----They are not metric.
  17. R

    Engine Identification?

    Perhaps leave it where it is for the wee critters to build a home again.-----Looks like they were in there already.
  18. R

    Running problems

    Does spark jump a gap of 7/16" on all leads on a test device ?---Compression test results are recent ?---Are you pushing the key in while cranking for the cold starting ?----- -I can not see, hear or feel your motor.-----You must do inspection / testing and report.
  19. R

    Any way to tell year and model number with serial number?

    The 1993 models and newer had a top mounted recoil.----Post more pictures of your motor !!
Top