Search results

  1. R

    What would you put in a small outboard repair kit?

    Going to be hard to find the shearpin on that motor.
  2. R

    Likely cause of compression loss in cylinder 1

    Try setting valve lash first.
  3. R

    What would you put in a small outboard repair kit?

    Use an older OMC product ( 18 / 20 HP ) with the universal magneto.------Those were a dual system.----Each cylinder has it's own ignition system.-----If one failed then the other would get you home.
  4. R

    Why do they make 12 point sockets and wrenches?

    Visit u-tube and you will find multiple examples in automotive engines.----They use 12 point fasteners.
  5. R

    What would you put in a small outboard repair kit?

    ?----Clean underwear perhaps.--Bear spray for everyone.-----But go for it , it sounds like a wonderful adventure in the planning stages.-----Post some videos when you get back.
  6. R

    Advice on first extended trip with 14 footer/7.5

    Looks like a place where you would hit rocks about 5 minutes away from the docks.-----Chart or electronic navigation in your budget ?----I have driven on the 101 / 129 on the way to WAWA.
  7. R

    Advice on first extended trip with 14 footer/7.5

    Just 7 trips of 15 km or 105 km to get everything moved to camp.-----Take the first day of your week and the last 1/2 day ( beer cans will be empty ) to finish the week ----And all weather permitting.------Where / when is this adventure taking place ?
  8. R

    Cracked Block???

    It would be interesting as to how many engines suffered last week.
  9. R

    Bought another one from Rawhide Youth Services

    Does not look nearly as sturdy as my Troy Built 8 HP.----I have one of the real ones , cast iron Kohler engine.------Cast iron everything and solid. ----Built before a new owner ?? started using the name.
  10. R

    Advice on first extended trip with 14 footer/7.5

    If you made 4 trips then 3.5 X 30 km would make it 105 km to get everything moved to camp..----You will need a big gas tank or at least 3 tanks of 22 liter each.----I think you need a bigger boat and perhaps a motor that does not sputter at idle.
  11. R

    Advice on first extended trip with 14 footer/7.5

    With 4 hefty adults and 500 LBS of gear the boat won't plane out.-----Forget about making a 35 km trip.-----Make sure you have a new impeller in the motor.-----Make sure you use a lower pitch prop to suit the heavy loads.-----I think you need a 25 HP motor or a 35 HP motor on a 16 / 18' boat.
  12. R

    Why do they make 12 point sockets and wrenches?

    Many fasteners made with high tensile steel ( 180,000 PSI ) are in fact using 12 point heads.-----Since the early 1960's Johnson / Evinrude connecting rod bolts.--Many newer Mercury connecting rods are also 12 point heads.--Some Honda outboard flywheel bolts are also 12 point heads.
  13. R

    2 Stroke Oldie Evinrude.-

    I say this thing is a " wallhanger "------Doubt it will run for long should it free up.
  14. R

    Waking up a '93 Johnson 200

    Remove lower unit incase that is seized up.----If it is still stuck then motor needs to come apart for inspection.-
  15. R

    2010 Evinrude etc 60HP won’t stay running

    There are no carburetors on an E-TEC motor.
  16. R

    Flywheel material?

    There may be a way to fit an older steel ring gear onto these new cast iron style flywheels.----Will get you the end result you seek.
  17. R

    2 Stroke Oldie Evinrude.-

    Remove the plate behind carburetor.------Look at piston / rod / crank bearing / reed valve.-----I think it would be a mistake to buy parts for this " motor "
  18. R

    Flywheel material?

    Cast iron.----I do not believe welding is the best option.
  19. R

    1956 Johnson 10 HP QD-17

    If that is the picture of your motor?
  20. R

    What’s this part?

    Might be to do with electric choke I think.
Top