Search results

  1. R

    Just a question

    There is no gear shift on this motor !
  2. R

    Uhhhh

    You mis-understand.-----Sparkplugs are not used when testing the condition of the magneto.-----Do you see spark on the plugs , yes ?----Do you see spark when magneto is forced to produce maximum output ?----Do you see spark jumping a gap of 1/4" on some testing device ?
  3. R

    1971 johnson no spark

    The stator charges the battery.----The stator is not involved in making spark on this machine.
  4. R

    1971 johnson no spark

    Test for spark with the distributor assembled and flywheel on.
  5. R

    Uhhhh

    I would bet you saw spark on the plugs.----Not a good test.----Does spark jump a gap of 1/4" or more ?
  6. R

    vaule of 1958 Evinrude Lark 35

    They put a very good and very durable plate right above the clamps that hold motor on the boat.
  7. R

    Top piston worth replacing? (120hp low compression)

    Fairly obvious what needs to be done.----Total teardown is in order.
  8. R

    XR4 Blackmax 150 - can't find a prop to fit

    A google search says that gearcase is used on 1988 to 1990 ? models.------Some years they used 2 different gearcase numbers.
  9. R

    XR4 Blackmax 150 - can't find a prop to fit

    Step #1 is to determine the pitch that you need to fit the BOAT and the conditions.---Then see a dealer as they can help you.
  10. R

    1988 Merc 200 HP Smoking during warmup.

    Some might argue.----That is normal and typical of a 2 stroke engine.-----And also proof that lubrication in a 2 stroke is not well understood.
  11. R

    Top piston worth replacing? (120hp low compression)

    There are broken / loose pieces inside the engine.-----Remove the bypass cover for the cylinder in picture #2.----Likely a broken piston ring.
  12. R

    1956 Johnson 10 HP QD-17

    You have to be a bit of a character to work on older outboards.------And if he will fix yours don't argue if he wants $15.00 / hr.
  13. R

    1956 Johnson 10 HP QD-17

    Join ------aomci-----Free " wanted ads " and swap meets at your local chapter perhaps.----Often you can pick up a good parts motor for $50 along with $100 worth of free , top notch advice.
  14. R

    1956 Johnson 10 HP QD-17

    Your location ?
  15. R

    2 Stroke Oldie Evinrude.-

    Looks like scrap metal to me.-----Likely rusted needle bearings and crankshaft.
  16. R

    Compresion gt 200

    A lot depends on what gauge you would be using etc, etc.-----So what numbers do you see on your motor ?-----What is the reason for your compression concern ?
  17. R

    Mercury's New Outboard

    In the specifications it says 1260 LBS *---- * lightest model in the line-up.----Extra long models are heavier.---Routine maintenance can be done by lifting the wee cover and is very clever.---They say that you do not have to remove the main cowling until 1000 hrs are put on it.------Now I have...
  18. R

    Mercury's New Outboard

    I thought I saw 1200 LBS somewhere.
  19. R

    72' 50hp electric shift issue

    They are spring loaded to go into forward when motor is NOT RUNNING.-----These motors shift with oil pressure therefor the oil pump in the lower unit must be turning.----Note ---I test these on the work bench.-----With 12 volts to green they shift to neutral after 1 turn of the...
  20. R

    1989 Johnson 90HP - Is This Block Repairable? (Chipped Ports)

    It is a mistake to install new rings on old pistons.-----Not going to explain why here.
Top