Search results

  1. L

    What Is this alarm? Mercury 2001 125hp

    Confirmed, it is the temperature sensor, it only happens when we run it at more RPMs for a while I think maybe the impeller is bad, if a rev it up the alarm goes off, I think at higher RPMs the water flow increases and cools down the motor, I will change the impeller and try
  2. L

    View of unloaded trailer with pickups

    Ok I think I wouldn't mind to have rear cameras in my truck, I just tried a friends truck and that thing is amazing.
  3. L

    projects other than boats

    Actually I took a bad choice I wanted the tree to cross through the ceiling but not supporting the structure so It had the tree house feeling, but that complicated everything, now Im trying to resolver the things.
  4. L

    projects other than boats

    Technically not in the three though
  5. L

    projects other than boats

    A tree house for my kid.
  6. L

    Back into the 1989 85hp rebuild

    After reading some older posts I think I should start by swapping components to try to identify the faulty component.
  7. L

    Back into the 1989 85hp rebuild

    Did spark test today cylinder#1 with the spark tester I got spark on all three cylinders but #1 didn't looked even, so then I turned on the engine and unplugged the plug lead while running and I didn't see difference, I think I have intermittent firing, definitely something wrong there. I see...
  8. L

    Back into the 1989 85hp rebuild

    thanks, I will try and inspect again fuel lines, fuel pump, the spark etc what is mentioned above, this weekend I will try it in water I will take video to share for your thoughts. Also just for the record compression is 110 - 120 - 120.
  9. L

    Back into the 1989 85hp rebuild

    I changed the pump diaphragm recently also, that should be ok. Ok I will test by removing the plug leads, that doesn't damage the coils? I have been always afraid of doing that and also to receive a shock. In my mind my the issue is a fuel issue, but as I rebuild the pump recently I just don't...
  10. L

    Back into the 1989 85hp rebuild

    Spark does jump 3/8" last time I checked, I can do it again to make sure nothing changed, I also cleaned carbs, how can I test if it is running with one less cylinder?
  11. L

    Back into the 1989 85hp rebuild

    I sprayed the back of the carbs and the intake manifold, spraying behind the lower carb right side looking from the carb side the motor starts to rev down, it didn't die but rev down, according to what Jerry told me that is bad seal that needs to be fixed, after that I retorqued the intake...
  12. L

    Back into the 1989 85hp rebuild

    Not bad.
  13. L

    Back into the 1989 85hp rebuild

    I have put the motor back together, I was very detailed in putting back the intake manifold, I checked to see if it was twisted but seems to be ok , I used double intake manifold gasket see if it improves the sealing, I had bad reed plates gaskets and didn't wanted to wait to order replacements...
  14. L

    What Is this alarm? Mercury 2001 125hp

    I think the system works but it needs maintenance, if now the sensor is bad I would need either to fix that, change the reservoir or run with the sensor disabled, in the last scenario then I will have to think and remember about oil level anyways I still need to find out what exactly is what is...
  15. L

    What Is this alarm? Mercury 2001 125hp

    If what is triggering the alarm is this sensor I will disconnect it as well, that is one more reason of my doubts about this oil mixing system.
  16. L

    What Is this alarm? Mercury 2001 125hp

    Thanks, the oil reservoir sensor just reads level right? it will not read flow?
  17. L

    What Is this alarm? Mercury 2001 125hp

    Ok... According to a YouTube video it should be overheating or oil sensor, I don't think it was overheating I saw good water flow and can touch the block, oil reservoir was full maybe the sensor is badi will have to inspect to be sure.
  18. L

    What Is this alarm? Mercury 2001 125hp

    Can anyone tell me what is this alarm? Is this overheating?
  19. L

    View of unloaded trailer with pickups

    the other thing I figured out is that backing up slowly is the fastest way, do all adjustments needed in one move to say it some way, I've seen people doing it fast and they backup realizes they are in bad possition and then get out of the ramp/parking lot completely to adjust possition and try...
  20. L

    1974 Chrysler 135 hp limping

    Nice find! It amazes me the deals you can find on outboard in the US, I'm located in Mexico the main market of marine stuff here is in the coasts and most of the outboards are run until they completely die, in my last trip to the beach I asked a couple fishermen where I could find a good used...
Top