Search results

  1. CaneCutter79

    New prop tested, are these results correct for my motor/setup?

    1. My performance issue was I wanted more bow lift and increased overall top-end speed. I have that the bow lift and a lot of it but I have lost 1mph. 2. Current prop is a Turbo1, 3-blade polished stainless steel(vented) This prop has a good rake and progressive pitch 3. Current prop diameter...
  2. CaneCutter79

    Adjust timing - benefits & drawbacks

    On cars & trucks, you can advance the timing and get better performance but it's harder on the motor and sometimes reduces fuel efficiency. I assume the same applied to marine outboards. What are the benefits of advancing the timing? What are the drawbacks? Shorter life and decrease in fuel...
  3. CaneCutter79

    What is this hole in the side of my boat?

    OK, I'm not totally new to boats and I know boats pretty well. I'm a bit lost on what this hole is on the side of my boat. Its a 79 Cane Cutter modified v-hull. The hole appears to be an intake for an aerator but that aerator is at the very back of the hull. So is the bilge pump. Just below...
  4. CaneCutter79

    What spline do I have?

    Make: Evinrude Model: 85999R HP: 85 Year: 1979 Spline Unknown How do I verify this?:eek:
  5. CaneCutter79

    85hp Evinrude, Water pump-replace or keep?

    I was told I should replace my water pump while doing a tune-up. The former owner cannot remember the last tune-up and suspects it was up to 10yrs ago (or more). Five years ago at the earliest. I know I should replace the water pump but I'm wondering, just how dangerous is it to leave the one...
  6. CaneCutter79

    Cowling paint spec for 1979 Evinrude

    I want to repaint the cowling of my '79 Evinrude 85hp outboard. Does anyone know the exact paint specs/color or how to find it? It's currently blue (see link below) http://rides.webshots.com/photo/2378354520101354590CDTjZo Can I just go to my local OMC authorized dealer and order the paint?
  7. CaneCutter79

    Opinions needed on Turbo props

    I have received recommendations for a new polished SS prop. The manuf. is TURBO. The Turbo 1 is what was recommended to me for my boat based on a boat owner's personal experience with other reputable props. I know that what works for one, doesn't always mean it will work for another person...
  8. CaneCutter79

    How to fill power tilt/trim

    I have a 1979 Evinrude V4 85hp outboard. I think I know how to add power trim fluid to the reservoir but I want to do it right. Do I simply remove the screw, add the fluid into the reservoir/shaft until the fluid starts to come out? Then replace the cap, tilt the motor up and down a full...
  9. CaneCutter79

    Kill switch install for a '79 Evinrude 85hp outboard

    My boat never had a kill-switch installed before and my state requires a kill switch by law. What wires do I need to connect the kill switch to in the controller to install a kill switch? I'm buying a universal kit this afternoon and I was hoping to install it. Any helps is much appreciated!:D
  10. CaneCutter79

    Performance Prop vs. SST Factory

    What is the overall difference between a Raker, Turbo, or other performance prop compared to a factory SST in the same pitch? Lots of bass boat guys tell me the performance prop is a night & day difference compared to a factory Evinrude SST prop. I know you can't really tell the difference in...
  11. CaneCutter79

    How do I wire-up my OMC tachometer?

    I just bought an OMC tachometer for my 1979 Evinrude 85hp V4 outboard. The boat never had a tachometer and I'm going to install one. The pics below show the tachometer and I also have pics of my motor below as well in case that reference is needed. I have a positive lead and negative/ground...
  12. CaneCutter79

    What tachometer will work for my motor?

    1979 Evinrude 85hp V4 Model# 85995R I am looking for an OMC or universal tachometer for my motor. I am seeing something about "5/6/10/12/ and 20 pole". What's that? What do I need to know about my motor before buying a tachometer?
  13. CaneCutter79

    Prop/motor height setup

    My boat is a 79 model with a tri-hull up front. The back portion of the hull is not as deeply "V" shaped as newer bass boats so it sits a bit flatter and has no contour towards the front of the bow. In other words, the keel is pretty much level and straight until it reaches the bow where it...
  14. CaneCutter79

    Burning up starter solenoids...why?

    I'm on my 3rd starter solenoid right now within the last 2-3 months. I have a '79 Evinrude V4 85hp outboard. My starter is good, the battery should be fine, so why am I having to replace the starter solenoid again for the third time? I have used a volt meter on each solenoid lead while...
  15. CaneCutter79

    '79 V4 85hp Evinrude Compression spec

    My motor was loosing RPM's after it was warmed up. I don't have a tach but I am estimating the motor runs around 5K at WOT. After about 5-7mins, the RPM range dropped to around 3,500-4,000RPM and the motor sounded like it was struggling or bogging down. My boat mech. ran compression tests and...
  16. CaneCutter79

    Tachometers - will automotive tachs work or strictly marine?

    Can I use a lesser inexpensive automotive tachometer for a smaller outboard? I found one that will work on 4, 6, and 8 cylinder engines. I'm guessing this is a stupid question and only a marine tachometer will work correct? I have an 85hp Evinrude V4.
  17. CaneCutter79

    How do I find my gear ratio?

    I need specifics on my motor to better determine prop selection. One of these requirements is the gear ratio. How can I determine this? Motor: 1979 85hp Evinrude 2-stroke V4 I don't have the model# but I can get it. That info will be most helpful I'm sure. I think it's 85990, 85995, or...
  18. CaneCutter79

    Old boat with factory prop slipping

    I have a 1979 Cane Cutter modified tri-hull style boat. (see photo) The current prop is a 19-pitch three blade OMC factory steel prop. I have a 17-pitch vented aluminum prop that has a bit more bow lift but not much and I loose about 3-4mph but gain a slight increase on RPMS. INCREADIBLE...
View older results
Top