Search results

  1. CaneCutter79

    Opinions/feedback on Ducky cleaners/wax?

    http://www.iboats.com/Ducky-Supreme-4-Restore-Revive-Gel-Coat-And-Fiberglass-Correction/dm/*******.952344707--session_id.536885417--view_id.885908 I haven't been on iboats in a while and I'm getting ready to start more work on my boat. I need to repolish a few spots with oxidization to get it...
  2. CaneCutter79

    Need cover, can't find cover specific to my boat-need help

    I'm posting this here since most folks active in this forum are working on restoration and older boats. I too am restoring my boat and I need to buy a quality cover for it. I can get accurate measurements and I can post specific info. I was hoping someone can maybe point me to a more popular...
  3. CaneCutter79

    Interchangeable parts for '79 Evinrudes V4s

    This is probably a dumb question but can you convert an 85hp V4 to a 100hp or 115hp V4 by simply changing the carb? I'm 99% sure the answer is no but the two motors are identical in size. I just confirmed the pistons are the same size between the two motors by looking up the part numbers...
  4. CaneCutter79

    Older motors, Ethanol, and synthetic oils

    Here's something I ran across after reading up on the the ethanol in outboard motor issue. Newer sythetic oils are thinner but coat better than oils back in the 70's & 80's. Some folks are going from 50:1 ratio to 100:1 because the oil smokes less and reduces cabon/oil build-up in older...
  5. CaneCutter79

    How do I apply a plate aplique to the cowling?

    1979 Evinrude 85hp, model 85995R part no. 0208367 How do you apply this to the cowling? It does not have a sticky back. I found some original replacements and need to replace my factory applique. Do I glue it on? If so, what type of glue? Do I remove the paper backing and apply to the...
  6. CaneCutter79

    Just how difficult is it to rebuild an outboard?

    1979 Evinrude 85hp V4, model 85995R I'm told I will probably need to rebuild my motor. The motor is in terrific shape overall (other than my current dilema) and it has lasted for 31 years without so much as a tune-up. No joke!:) I know the original owner well and they took care of the...
  7. CaneCutter79

    Fiberglass or Composite Materials?

    There must be debates on this somewhere but I'm not finding much information geared around boat hull construction rather than car body construction. My question is which is stronger or better material for boat construction, fiberglass or composite material? Also, what composite material is...
  8. CaneCutter79

    Horsepower rating at powerhead or prop?? 85hp V4

    I was told the horsepower rating for my 1979 85hp V4 Evinrude outboard was rated at the powerhead and not the prop and newer motors are rated at the prop, not the powerhead. Model #85995R. If that's true, what would an equal alternative outboard be for a newer motor if I were to replace my...
  9. CaneCutter79

    Bad tachometer?

    I have a 1979 Evinrude 85hp outboard. I bought a used OMC tachometer last year and it's worked fine until my last two outings. The tach needle is reading somewhere around 6,000rpm (stuck) and will not respond to the motor. Usually, when I turn the key on, the needle drops to "0". I have...
  10. CaneCutter79

    Spring clips for spark plug wires?

    Re: Spring clips for spark plug wires? I got my new Sierra ignition coil in today. The spring clip has a 90-degree turn on the end vs. a straight end. So I stripped of the insulation, split the wire into 2 parts as noted above, inserted the 90-degree turn of the spring wire perpindicular into...
  11. CaneCutter79

    Spring clips for spark plug wires?

    How are supposed to connect the spring clips on spark plug wires? A) Solder (if so, what type) B) Stick the clip into the wire C) Some are bent and some are straight, what's the difference...
  12. CaneCutter79

    Fast mini-pontoon?

    I saw an image online a while back where a company makes these mini-pontoon boats and puts on large outboards like a 90-150hp motor. Which is insane for a mini-pontoon. I want to say it's a fishing setup much like an ocean kayak with rod holders and such. I can't find anything on the...
  13. CaneCutter79

    Spark issuse solved, now low compression in one cylinder

    I have an ignition problem and I need to determine if it's a coil going bad or failing power pack? See issue below. My motor ran great last weekend and has been all summer. I got a tune up last fall, new plugs, etc. This morning, the starter gear failed to disengage and made awfull noises...
  14. CaneCutter79

    How to adjust idle? ('79 V4, 85hp)

    Anyone have any instructions or pictures of how to do this? My idle is too low and needs a slight adjustment. I heard it was as simple as turning a screw on the motor. Any thoughts?
  15. CaneCutter79

    Bendix gear slipping, something serious or is this normal?

    I was de-greasing the motor with some "Gunk" degreasing foam around the block and seals yesterday. Before degreasing, I started the motor to check the RPM range. I'm only getting 5,000rpm on the water and I wanted to be sure it was from the load on the boat and the prop/motor setup. I had...
  16. CaneCutter79

    Max. hp rating for 2004 ZX 250 Skeeter bass boat?

    What is the max. horsepower rating for a 2004 Skeeter ZX 250 hull? Someone is selling theirs with a 300hp Vmax and I?m wondering if that is over the horsepower rating. If not, WHOOHOO! :D
  17. CaneCutter79

    Too much cavitation from new prop?

    With the videos below, does this sound like too much caviation? I'm happy with my current motor setup. I just don't want to damage my lower unit, the prop, etc. The prop is a new 17-pitch 3-blade Turbo1 on an 85hp Evinrude with a 15.2 tri-hull fishing boat. I have great lift and the fuel...
  18. CaneCutter79

    Replace my flywheel?

    A) How hard is it to "do-it-yourself" for a guy with decent mechanical experience B) Is my flywheel starting to fail? C) What price range is a new flywheel for my motor (I'm finding $150-$200) D) If it is starting to go, how long do I have before it fails completely? I'd hate to be stranded...
  19. CaneCutter79

    Is this a bad coil?

    When I bought my boat last year, the coil had been damaged from pulling the cowling off the motor. The latch on the cowling cut the wire on top of the coil so the owner soldered it back together. The motor is a 79 Evinrude 85hp V4, model# 85999R. I have seen where my buddy's much larger and...
  20. CaneCutter79

    How do I install a water press. guage?

    I've been advised to install a water pressure guage. After looking at my motor setup and wanting to raise the motor 1-2", this is a must. Motor: Evinrude 1979 85hp V4 Model: 85999R How do I go about installing a water pressure guage? Is it difficult? Any pics or schematics would be awesome.
Top