Search results

  1. jimmbo

    Guess Who needed a tow home ?

    In 86 few if any 30hp engines had Power Tilt, though it was offered as a Dealer installed Accessory. Power Trim wasn't offered for it
  2. jimmbo

    86-87 Mariner 150 questions

    Time for a Compression Test, and Spark Test(jump a 3/8" gap) I suspect there is a bit more to this Story....
  3. jimmbo

    Prop, or Engine Issue?

    Another Compression Gauge might yield/provide better info. As stated Prior, those Numbers are slightly over 50% of what would be expected.... Careful about a another Thread, as running 2 Open Threads by the same Person about the same Motor, can get complicated to follow...
  4. jimmbo

    VRO delete fuel mix ratio?

    50:1
  5. jimmbo

    Buy a 5hp Mariner with a blown head gasket?

    600 rpm, give or take 50 rpm. I like to go as low as practical, as it is easier on the Shift Mechanism, which is either In or Out of Gear, no slip Clutch to ease in
  6. jimmbo

    Why I'm nervous boating at night...

    50 yrs ago, I missed a Canoe by less than 30 ft. Simply sheer Luck. Someone's Moron Kids decided to go for a Midnight Paddle. You can't cure Stupidity.
  7. jimmbo

    Scraped bottom

    Installing Power Trim or Tilt would have a few Benefits. Replacing and/or Repairing a few Props a couple of times, and overall Costs are Similar
  8. jimmbo

    Mercontrol shift/throttle lever 75% travel limit now

    Are the Carbs fully opened when the Lever has stopped?
  9. jimmbo

    WATER JACKET/HEAD GASKET 1987 25 HP 2 STROKE MERCURY

    Quite low. As the numbers are Similar, You might want to try another Compression Gauge. When doing the Test, keep pulling until the Gauge reads no higher. Might take 3 or 4 pulls, might take 8 or 9... If the Rings are Stuck a bit of Combustion Chamber Cleaner overnight might help. I had...
  10. jimmbo

    WATER JACKET/HEAD GASKET 1987 25 HP 2 STROKE MERCURY

    You have to take the Cover off to replace the Gasket. Here is when I did my 115
  11. jimmbo

    Prop questions on a 16' 1976 StarCraft Montego (Merc 888)

    With a Recommended Top Rpm of 4200, a 302 is not going to need much for Carburation, a very small 4bbl, like a 390 cfm would be overkill 302 cu in at 4200 rpm can inhale 367 CFM, at 100% Volumetric Efficiency, However an engine from that Era, would at best have, 75% VE, so it would inhale 275 CFM.
  12. jimmbo

    Prop questions on a 16' 1976 StarCraft Montego (Merc 888)

    351 Heads on a 302 actually raising Compression sounds like a long shot, the Combustion Chamber is Larger and will drop the Compression from 8:1 to less than 7:1, unless some Machining and/or Parts changes also happened. As for the Cam, is it a Marine Grind, or some Street Auto/Truck Grind?
  13. jimmbo

    I am starting to believe some of the global warming in N J.

    Mother Nature is just reminding Man that He really doesn't own the Planet, that It was here before He came along, and will still be here long after He is gone
  14. jimmbo

    WATER JACKET/HEAD GASKET 1987 25 HP 2 STROKE MERCURY

    The Water Jacket Covers on a lot of Mercurys will leak around the Spark Plugs, and yes it can happen because the Engine was starved of water, and the Cover would distort, and the Gasket would shift/tear. Happened a Few Times on my inline 6, After the 3 time, the Dealer GAVE me a New Jacket...
  15. jimmbo

    I am starting to believe some of the global warming in N J.

    Hit 100F in Edmonton Alberta the last couple of Days, and it is about 320 miles North of the 49th Parallel At 1:40 AM is it is still 79F I almost miss the -40F we had for a Week in January
  16. jimmbo

    Prop questions on a 16' 1976 StarCraft Montego (Merc 888)

    A 302 spinning 5000 rpm isn't going to Need more than 370 CFM@1.4" Pressure Drop. The Marine Holley, if Factory Calibrated properly, will certainly have a Fuel Delivery Curve far more Appropriate for a Marine Application, than an Auto/Truck Carb, and be USCG Compliant, reducing the Chance of the...
  17. jimmbo

    Evinrude 35hp Lark Solenoid won't kick

    The Only Years for a 35hp Lark, were 1957, 58, and 59
  18. jimmbo

    Prop questions on a 16' 1976 StarCraft Montego (Merc 888)

    "Hopped Up", 188hp, to 200hp would be about 2 mph more top speed, and likely a slightly slower Holeshot. What exactly was done to Hop it up?
  19. jimmbo

    Need to vent....

    BMW, is the Acronym for 'Bring My Wallet'...
  20. jimmbo

    Tilt and Trim 150hp Mercury v6

    Reread my last Sentence, regarding the Filler Cap.
Top