Search results

  1. Scott Danforth

    Exhaust noise SX drive

    you are confusing OMC Cobra and Volvo SX if you have a volvo SX you have exhaust that exits from the anti-ventilation plate, you do not have and OMC Cobra that exits from the prop
  2. Scott Danforth

    Volvo Penta bell housing question

    first, per the rules you read to sign up for this site, there is no buying or selling or soliciting second, welcome aboard third, if your '84 had an Aquamatic drive, you need to either rebuild the transom, or you need to find the ultra-rare and ultra expensive AQ to SX transom assembly. so...
  3. Scott Danforth

    Duo boat question

    get it registered in your name before restoring it.
  4. Scott Danforth

    Ford 302 alternator proper amp size

    maybe google the part number. or get your old Delco rebuilt or get a higher output alternator and change the wiring
  5. Scott Danforth

    Trying to reprop, but how can I tell if my engine gets to WOT?

    if you went from a 1.62:1 drive behind your 250 cubic inch motor to a 2:1 drive, and you were turning 4500 RPM before, you would be turning about 5200 RPM which is grenade the engine territory either you messed up the throttle or you have a different drive ratio than you thought
  6. Scott Danforth

    Trying to decide between 3 older boats!

    mainland michigan is a 4 hour boat ride. https://www.ssbadger.com/schedule-fares/
  7. Scott Danforth

    Boat company name

    being a 1977 it would have a HIN and not a serial number with a serial number, its older than 1972
  8. Scott Danforth

    Filling coolant reservoir 3.0 TKS?

    pull the puke tank and rinse it out.
  9. Scott Danforth

    Filling coolant reservoir 3.0 TKS?

    if your coolant is green, you add green to it if you coolant is orange, you add orange to it if you cant figure out the color, you change it and follow the manual if you just need to top it off a bit, simply add a few ounces of water.
  10. Scott Danforth

    1982 Aquasport

    first, welcome aboard if your boat is a 1982, then there should be a 12 digit HIN on the back of the transom. what does your paperwork say the HIN is. there are no such things as boat manuals.
  11. Scott Danforth

    Buying a fishing boat

    read this: https://forums.iboats.com/threads/for-new-members-needing-help-buying-a-boat-a-buyers-checklist.612841/ stick with aluminum boat and outboard for a first time boat.
  12. Scott Danforth

    New motor

    you want to unbolt a 40hp motor and bolt on an older 115hp motor. first, what is the transom on your pontoon rated for? do not exceed this rating. even if the 30 year old pontoon is rated at 115, how is the structure? if you dont know your rating, you can look here...
  13. Scott Danforth

    Exhaust noise SX drive

    you know on a volvo the exhaust comes out the anti vent plate and is above water as soon as you are on plane. as apposed to say a Mercruiser Alpha 1 drive where the exhaust goes thru the prop. my guess is that with the idle relief port blocked, it will be slower to plane, however you will...
  14. Scott Danforth

    Chevrolet Demon 5,7 l marine engine

    without a year, cant help with the model. however I am speculating...... if its an AQ271, or an AQ290 or AQ311, it would have a holley 715 CFM 4150 carburetor that the prior owner could either have swapped out the bowls for Demon Carburetor bowls. hence the confusion. Again, I am speculating...
  15. Scott Danforth

    Volvo Penta AQ DP 290 outdrive. Loosing "Forward" gear

    sounds like the cone clutch is slipping. first, are you adjusted properly at the shift linkage? second, is your oil level correct? third, the drive is near bullet proof the way volvo designed it back in the late 70's. yes, the materials are critical, as well as the clearances for the cone...
  16. Scott Danforth

    Engine stalling

    June 13th as in 51 weeks from now? the backfire means its going lean. what is your fuel pressure?
  17. Scott Danforth

    trailer manufacturer picks?

    Aluminum or galvanized
  18. Scott Danforth

    Boat company name

    Look it up in the fiberglass is library.
  19. Scott Danforth

    How long should a new engine be run before the first oil change?

    I ran the last motor on the stand for an hour, changed the oil, installed it, put 15 hours on it, then changed oil again. Now will change every 50-100 hours
Top