Search results

  1. Scott Danforth

    15ft Lowe Jon Boat Transom Repair

    first, unbolt the motor second, cut the welds off the corner moldings third, cut the rivets remove the wood cut all the rivets on the transom skin remove the transom skin and use to make a new skin from a sheet of 11 gauge 5052 aluminum rivet in new transom skin install new wood install new...
  2. Scott Danforth

    1989 OMC COBRA 2.3 Starting in high rpm

    your throttle cable is either broke or disconnected
  3. Scott Danforth

    Substitute for part 862583

    unless the pulley was smashed beyond use, use the pulley you have. if it shows a bit of rust, wire brush and spray with paint
  4. Scott Danforth

    How should I fill this hole in deck?

    why not just reinstall the hatch?
  5. Scott Danforth

    What else will bolt up to Volvo 270 outdrives?

    the whole thing about Volvo AQ series the AQ125 is 125hp the AQ145 is 145hp the AQ271 is 271hp you get the idea.
  6. Scott Danforth

    What else will bolt up to Volvo 270 outdrives?

    I would suggest finding a running AQ125 , or if you really want to change, get a complete longtail and modify the transom as needed
  7. Scott Danforth

    A1G2 decisions. Rebuild or replace?

    Then replace the ujoints and go boating
  8. Scott Danforth

    OMC exhaust flapper alternative.

    Could ditch the log manifolds
  9. Scott Danforth

    Top speed?

    Fix your prop
  10. Scott Danforth

    A1G2 decisions. Rebuild or replace?

    I would go SEI if the drive needed rebuilding However if you have water in the drive, the water is sitting in the lower
  11. Scott Danforth

    1989 Renken 2000 I think I'm in trouble

    We all have been there, some of us keep buying projects.
  12. Scott Danforth

    Key replacement

    No, there are under 2 dozen various cuts Cabinets keys are worse as there are about 7 with the most common being a CH 751
  13. Scott Danforth

    Key replacement

    visit your local evinrude/johnson dealer. he probably has them in stock.
  14. Scott Danforth

    When you guff your brand new boat....

    just glancing at the pics the tape blended in and I thought "holey carp" then I looked at the pics. looks good BTW, dock rash means you use the boat.
  15. Scott Danforth

    Crest Pontoon Front Corner Caps?

    welcome aboard dealer for new ebay for used
  16. Scott Danforth

    boat and trailer sit very low (to my eye)

    or just pull the trailer up on ramps when you have to do maintenance
  17. Scott Danforth

    1989 Renken 2000 I think I'm in trouble

    first thing to rot is the transom second thing to rot is the stringers last thing to rot is the floor. to verify, tilt the motor up, get on the AV plate with a buddy and jump up and down. a good transom will not flex.
  18. Scott Danforth

    3.0 GS stalling when put in gear

    I would fix the issue before continuing to use the boat. FYI, a true mechanic would not have turned the idle up. that is how you tear up the cone clutches
  19. Scott Danforth

    1989 Renken 2000 I think I'm in trouble

    the deck is the last thing to rot after the transom and the stringers (the skeleton structure of your boat while the fiberglass skin may look good, the bones are rotten go to this sticky. https://forums.iboats.com/threads/how-tos-and-other-great-information.283508/ read threads 14, 15, 18...
  20. Scott Danforth

    AQ131 dwell setting

    yes, 0.4mm or 0.016" rough gap, then grab the dwell meter.
Top