Search results

  1. M

    2006 Hurricane Fundeck fencing paint fencing color

    Boat manufacturers don't keep or disperse information like car manufacturers. There are little to no manuals, schematics, paint codes, or parts lists. For that paint, your best bet would be to take it to an auto body supplier and ask them to use a color matching camera. It will most likely need...
  2. M

    Boats from work.

    Someone did this just to hide the rot and trade in.
  3. M

    1995 Crownline 202BR Restore

    Are you sure those squares aren't rotten or soft? Those washers are a pretty good indicator because the wood would have to be soft to pull them in like that.
  4. M

    1974 Caravelle. Tarpon?

    Maybe leave them out in the sun on a hot day?
  5. M

    Boats from work.

    Sealer. Painted. Reducing the photo size did some wonky things to the walls.
  6. M

    Bimini Top Hold Down Bracket is loose, need fix

    It could also be studs in T nuts in the back of the cushion. I very much agree. Cutting a 3 inch access hole behind the cushion won't do anything. Ouch, luckily I've never been claustrophobic.
  7. M

    Bimini Top Hold Down Bracket is loose, need fix

    Sometimes being a short guy helps, og course then I have a hard time reaching stuff once I get squirrled into a tight spot. Haven't gotten stuck yet though!
  8. M

    Bimini Top Hold Down Bracket is loose, need fix

    I run into stuff like that all the time. Boats aren't made with repairs in mind. All of that hardware was installed while the cap was lifted up and easy to get to. You might just have to have a second person hold the screw whilr you cram yourself in there to get to the nuts.
  9. M

    How much deflection is normal in Fiberglass Deck

    Hey, I took it in stride, no offence here. I know my shortcomings, and calling witchcraft was a joke based on them.
  10. M

    Painting Hull With Rain Chances

    It will leave water spots though.
  11. M

    Medium Float Pod Install Price

    Does it include repainting? Also, another member recently had some trouble with this same situation. Give this thread a look, and ask your welder how he will avoid this. https://www.iboats.com/threads/aluminum-transom-has-had-heat-distortion.781312/
  12. M

    Random

  13. M

    Boats from work.

    The cobalt left Friday. Next are a couple of semi fenders and rear bumper (?). Just sand and paint, fixing some minor stuff. These are right out of the molds.
  14. M

    How much deflection is normal in Fiberglass Deck

    That makes my brain hurt just looking at it. I barely passed high school math.
  15. M

    EVA Form

    It can bend a bit, but isn't as flexible as carpet. I wouldn't try to wrap a lid with it. I would expect it to start peeling away from those corners pretty quick.
  16. M

    How much deflection is normal in Fiberglass Deck

    Witchcraft!
  17. M

    How much deflection is normal in Fiberglass Deck

    I was hoping it would be a removable panel, but in that picture it looks like solid floor. What about just cutting it out and putting another deck plate there?
  18. M

    Random

    Here's one a little less controversial.
  19. M

    1995 Crownline 202BR Restore

    They're tight because the threads are usually not straight, they're spread open just a bit. I run into that with old and new. It'll just get scraped off as you push the bolt in and make a bigger mess. What's a good cleaner for fresh 5200? Acetone? I use wax and grease remover when cleaning up...
  20. M

    Random

    Man, there's just no sense of humor in the world.
Top