Search results

  1. alldodge

    2003 Crownline oil reservoir fitting

    The motor has to come out to replace. Ever since Merc went to the cheap plastic fitting there have been several that have broken. Part number 22-861150T02 The cheap one cost around $20, the upgraded brass one if you can find it is around $75 The drive lube monitor can be blocked off but I...
  2. alldodge

    Help with Cool Fuel system removal 2005 312FV

    Welcome You are correct it how the complete module needs to come out. It can also be removed in pieces by leaving the bracket in place. I would suggest that if you have the equipment to remove the motor, think overall it might be easier. Maybe remove at least port side
  3. alldodge

    Knocking sound from my Alpha One Gen 2

    I think it's in the drive, something has loosened inside and/or chip/broken gear tooth. What does the gear lube look like?
  4. alldodge

    Bow Filler Cushion

    Welcome Hopefully someone will respond with answers and pics I would also suggest contacting Chap 229-686-7481 or email customerservice@chaparralboats.com I've had them send me drawings of parts
  5. alldodge

    Strange Previous Owner Hack Job..?

    What is the connector with the cut wires connected to?
  6. alldodge

    Anyone haul their inflatable this way?

    Opinion The premise looks ok but I would not use the Ribs D rings to apply the holding force. I would use a strap going completely over it and fastened to each side of the truck. Use the D rings only to help keep it from sliding out from under the main strap. Would also use a larger strap
  7. alldodge

    Thinking about selling my 90hp 1986 Mercury inline 6

    Guys I see your having fun but your way off track from original question @ab59 if you have more questions post away otherwise I'll close the thread if folks keep on their current tangent
  8. alldodge

    Mercruiser Coil Wiring

    Also need a pic of the distributor to make sure it's still TBV
  9. alldodge

    Mercruiser Coil Wiring

    The issue's I'm having has to deal with configuration (how things are put together) Motor came with a mechanical fuel pump but now has an electric pump and a new oil pressure switch. Need to know the fuel/oil switch wiring? If the Blue wire goes connects to the fuel pump circuit than that wire...
  10. alldodge

    Weird overheating issues

    Connect a short clear piece of hose between thermostat and hose coming from pump. Boat needs to be in the water and your looking for bubbles
  11. alldodge

    How to remove pressed prop hubs before recycling

    I would try to press them out, either that or use a band saw to cross cut
  12. alldodge

    Bleeding Oil Injection Yamaha 60tlrc

  13. alldodge

    RE: LOW FUEL PRESSURE?

    Yes, just don't force, I know that's a abstract answer, but that is all we have to work with
  14. alldodge

    RE: LOW FUEL PRESSURE?

    No They weld a fitting into the tank so the pickup tube gets screwed into it
  15. alldodge

    Help?

    Welcome Happen to have the motor serial number?
  16. alldodge

    RE: LOW FUEL PRESSURE?

    Could be but just guessing In any case your pressure is back where it should be
  17. alldodge

    RE: LOW FUEL PRESSURE?

    Don't hear anything that bad, the whine might come from the power steering pump
  18. alldodge

    RE: LOW FUEL PRESSURE?

    Remove the vacuum line at the intake manifold Pinching the fuel return line should not be done, the pressure might increase enough to damage the regulator Gas is clear, seeing yellow means your gas is starting to phase separate
  19. alldodge

    My wife graduated college yesterday

    Congrats
  20. alldodge

    West Marine files for Chapter 11 bankruptcy

    Get stuff from them rarely and mostly because there have been no stores close to me ever. A few years ago ordered 200ft of Sampson double braid 5/8 anchor line. Order came in and there were 2 rolls of 200ft. Called them and the guy said keep it, and it's still on the shelf all wrapped up
Top