Search results

  1. Bondo

    Volvo AQ 260A lost compression, water in valve cover

    My Bad, AD,.... I cruised through late, 'n obviously didn't pay attention,....
  2. Bondo

    Volvo AQ 260A lost compression, water in valve cover

    Ayuh,...... That little bit of milkiness there is just condensation,..... No worries with that,....
  3. Bondo

    OMC 4.3 Electronic Ignition Swap

    Ayuh,...... Welcome Aboard,...... I bought an Inova timing light a few years back,.... I love it, as it does everything, timing, advance, 'n dwell,....
  4. Bondo

    Have you cleaned and resurfaced exhaust manifolds?

    Ayuh,.... Your manifolds are Junk,..... the rust you want to clean out, used to be cast iron,..... The thickness of the manifolds is gone,.... yer playing with fire, 'n you will get burnt,..... I'm done,..... it's yer motor in yer boat, do what ever you want to do,.... When you dump...
  5. Bondo

    Replacing Risers/Elbows and Exhaust Manifolds on a Ford/OMC Cobra 5.8 Ltr

    Ayuh,..... Double nut them to remove 'em, not with vice-grips,.....
  6. Bondo

    Power steering mount

    Ayuh,.... Welcome Aboard,..... I carry a bar of Lava hand soap in all of my toolboxes,.... Not only is it great for cleaning yer hands after a job, it works Great to help with slipping belts,.... Just rub it against the inside of the belt, at idle, 'n yer squeaking should go away,.....
  7. Bondo

    Replacing Risers/Elbows and Exhaust Manifolds on a Ford/OMC Cobra 5.8 Ltr

    Ayuh,...... The idea is to remove any residual gasket material, 'n obviously care must be used,.... there should be clean iron, before the new gaskets are installed,.... I believe the allowable variation is .003",.... I have big air in my shop, so my die-grinders are air powered...
  8. Bondo

    454 intake gasket not covering port

    Ayuh,...... It's the exhaust cross over, to hot for rtv,...
  9. Bondo

    Replacing Risers/Elbows and Exhaust Manifolds on a Ford/OMC Cobra 5.8 Ltr

    Ayuh,..... I use rol-lock abrasive discs on my right angle die grinder,...
  10. Bondo

    Replacing Risers/Elbows and Exhaust Manifolds on a Ford/OMC Cobra 5.8 Ltr

    Ayuh,.... You've got alota cleaning to do,..... Once cleaned, then inspections can be done,....
  11. Bondo

    What are the symptoms of cracks in an Exhaust Manifold?

    Ayuh,..... As I said in yer other thread with pictures, these manifolds are Junk,......
  12. Bondo

    Been gone 20+ years...I'm back. Question--removing mold/crap from an old boat

    Ayuh,....... Welcome back,..... I've had great luck washing the hull with TSP mixed in a bucket of water,.....
  13. Bondo

    Bass boat trim authority sucks in mid range

    Ayuh,...... Did you do as I suggested in post #13...??..?? The symptoms you say are/have happened, suggests the hull has a hog, or a rocker in it,.....
  14. Bondo

    Overheating Possibly Caused by Restricted Thermostat Housing Port

    Ayuh,..... That means they are agreeing with my post #12,..... Running that manifold will cost you a new motor, because that manifold is rusted out,.... The gasket sealing surface is but a small part of a rotten manifold,... At some point, fairly soon, that manifold will dump raw water...
  15. Bondo

    Overheating Possibly Caused by Restricted Thermostat Housing Port

    Ayuh,.... That manifold is junk, 'n needs to be replaced,....
  16. Bondo

    Lund tyee I/O transom removal

    Ayuh,..... Way back when I replaced the transom wood in my '74 Starcraft 221 Islander, I cut off a strip of the transom cap, changed out the wood, then pop-riveted a new piece of 1/8" aluminum, which being twice as thick as the original, gave me the perfect surface to mount my down-riggers,....
  17. Bondo

    Bass boat trim authority sucks in mid range

    Ayuh,..... Put a 6' straight edge along the keel line, from the transom, forward, 'n see whether there's a hook, or a rocker in the hull,.....
  18. Bondo

    1992 OMC 3.0 Cracked Block

    Ayuh,..... As Scott said, the long blocks '91, 'n up are all the same,....
  19. Bondo

    Mercruiser 5.0 replacement

    Ayuh,...... Welcome Aboard,....... How did you come to the conclusion that you need a new/ rebuilt long block,..??..??
  20. Bondo

    Help with Safety Chain

    Ayuh,...... Plenty of strength in that installation,.... You've already got the winch strap, 'n the ratchet strap,..... you don't need a logging chain on there,..... ;)
Top