Search results

Plan on a full restoration and potentially a repower

If you pull the never remove plug. You have to disassemble the whole drive to put it back together

Those are custom made rub rail caps only available thru the manufacturer of your pontoon

not sure single part paints will hold up in a wet environment

VP manifolds are really restrictive. there are no VP full systems

Pull the power head

First, welcome aboard Contact your local registration authority. They will advise on steps needed to become a legal owner Additionally, good boats are not abandoned. Before spending money, check the transom and stringers for rot

Pic of valve cover says Volvo

It's a boat only harness.

Check valves keep the panels full. Mine were 20 years old when I removed them for the new roof

Since every factory manual was printed by Ken Cook company, they are the only source of factory manuals. If it's OMC, that is where you get the manual

if your cable is more than 10 years old. buy a new lower shift cable

good luck, Im out

welcome aboard get a set of Volvo Penta F3 props. its about $600 a set.

welcome aboard orca, formerly san juan engineering has kits. your local VP dealer can get you the parts and you can assemble a kit yourself too.

first, welcome aboard what troubleshooting have you done? have you inspected the quality of the fuel in your tank? have you changed the water separating fuel filter? have you tested the anti-siphon valve? have you verified your choke works? what are your compression numbers? is this a new...

you have to get the tank cleaned before trying to run. what you have in the tank is no longer fuel, however goo. doesnt matter if your carb is clean now. trying to run the goo in your tank and you will end up back where you are. pay the mechanic to clean the tank. they basically remove the...

neither.... I dont do bass boats. catch more fish with my 1959 14 foot tinny than most people do with $100,000 rigs.

merc bought the heads from GM until 2015 when they built their own blocks and heads. the 00 truck motor you have has good vortec heads your cam from 1993 may work, however suggest you get a proper roller cam for your motor make sure to get a new circulating pump. the truck circulating pump...

welcome aboard there is no code reader. however you can buy Rinda Software and cables https://www.rinda.com/marine/marine.htm