Search results

  1. P

    Oil pressure

    Emptied as fast as put in?
  2. P

    Oil pressure

    I changed my oil and filter it emptied as fast as i filled it to the bilge what could it be
  3. P

    2006 Sun Tracker Regency 25'

    I use purple power to even get to this point So looking to see if there's anything
  4. P

    2006 Sun Tracker Regency 25'

    I have a 27 foot pontoon. I have used acid on the wash. And I can't get the last layer of stuff off. It's like concrete. Does anybody have an alternative way to get this done
  5. P

    Installed rebuilt carb

    The manual says hook your meter up to this Gray wire on the bottom right hand side of this picture is what they do for a shot test but I need the plug that would go on there
  6. P

    Installed rebuilt carb

    Yes started at 1 and 1/2. I think it's just the way a tach tool operates?
  7. P

    Installed rebuilt carb

    Trying to find out if that wire needs a special shop tool to do rpm. The auto tach with the clamp is what I have attached to the plug wire and fluctuates.
  8. P

    Installed rebuilt carb

    This white wire
  9. P

    Installed rebuilt carb

    The manual says this wire is for shop tachometer.
  10. P

    Installed rebuilt carb

    Is there a special tool to read rpm. My auto tach fluctuates between 680 and 720 and 800 on muffs. When doing cars in the old days it seemed to be a steady number. Also should the clamp be on the #1 plug wire? Also is it imperitive to remove throttle cable for accurate adjustment. I know the...
  11. P

    Installed rebuilt carb

  12. P

    Installed rebuilt carb

    Is there a special tool to read rpm. My auto tach fluctuates between 680 and 720 and 800 on muffs. When doing cars in the old days it seemed to be a steady number. Also should the clamp be on the #1 plug wire? Also is it imperitive to remove throttle cable for accurate adjustment. I know the...
  13. P

    Mercruiser 3.0 Idle adjustment

    Is there a special tool to read rpm. My auto tach reads between 680 and 720 and 800 on muffs. When doing cars in the old days it seemed to be a stady number. Also should the clamp be on the #1 plug wire?
  14. P

    3.0 2bbl carb adjustment after rebuild

    2006 3.0 mercruiser with alpha one 2bbl mercruiser carb
  15. P

    3.0 2bbl carb adjustment after rebuild

    Yes my question is the white lead for the test rpm. Do I use my probes and put the red in there and the black to ground. I have the clamp on for the spark plug wire but it fluctuates. Between 800 and 720 I am wondering if I use the white wire with the connecter will it be more accurate and...
  16. P

    3.0 2bbl carb adjustment after rebuild

    Is there a special adapter to use the test lead the white lead that's on the motor for RPM
  17. P

    3.0 2bbl carb adjustment after rebuild

    Got it stady at approx 750 to 775 on dash tach. Moved mixture screw 1/4 turn up got rougher. Then backed off 2/4 was rough there set 1/4 higher seems best. I guess I am looking for a perfect setting. Smooth but it seems like it will vibrate a little at any setting. What do you think always did...
  18. P

    3.0 2bbl carb adjustment after rebuild

    The dash tach stays steady but 900
  19. P

    3.0 2bbl carb adjustment after rebuild

    Clamp on tach on plug wire
  20. P

    3.0 2bbl carb adjustment after rebuild

    Thanks. I checked cable for bottom out on carb. Let it warm up reduced rpm a little started to run rough. Increased rich counterclockwise to 2 turns out seem to be better. Rpm now fluctuates between 720 and 800. On spark plug wire. How am I doing?
Top