Search results

  1. J

    Need Expert Help

    I know this is not the place to ask this question but I posted in trailer and got no response I have a 2000 bayliner ciera need to replace the power winch with a manual one can I get away with a 2000 lb winch or do I need something bigger
  2. J

    trailer winch question

    I have a 22 ft bayliner ciera with a 5.0 engine alpha outdrive my trailer is a double axel continental trailer. I need to replace the winch I have right now I have a power winch want to put a manual winch looking thru all the winch I notice there is a 2,000 Lb winch do you think this can work...
  3. J

    Don't want boat explosion

    I have a bayliner inboard 5.0 with an alpha drive my issue is safety am new at this so bear with me before I start the boat I remove the motor cover, turn on the blower for about 2 to 3 minutes then start the boat I head that lots of boat explode because people don't ventilate the engine...
  4. J

    sterring wheel size

    I replaced my Teleflex rack and pinion on my 2000/ 22ft bayliner ciera but now I want to replace the steering wheel been shopping on line but I don't know the size of the hole were the wheel goes any help is great on this
  5. J

    Battery issue

    I have a 5.0 - 8 cylinder year 2000 what should my battery cold crank be and should I install a dual battery will this help
  6. J

    Boat Toilet on my 22 ft boat

    I have a 2000 bayliner with a 5.0 mercruicer finally got everything running great thanks to this forum now the last have a toilet in the boat don't have any idea how it works this is what I found see pictures any help is appreciated
  7. J

    Shifting Problem

    I have a 2000 mercruicer 5.0 took it out had a hard time going from forward to neutral to reverse took the cables out shifter is smooth so the problem must be in the shift plate the boat has not been out for a couple years health problem here is some picture of what I found
  8. J

    Flushing a 5.0 mercruiser

    just to settle an argument I have a 2000 mercruiser 5.0 -8 cylinder engine when I come back from a day in the water I put the earmuff on the outdrive and I run the engine for 5 minutes to flush it, my buddy says that you do not remove all the salt from inside the engine and it's best to use a...
  9. J

    shifting Problem

    what is a shifter assist in a mercruicer 5.0 engine had problem shifting look like it was jamming in the shift plate both my shift cable are just attach to the plate with a screw saw a you tube video and there is something called a shift assist is there a schematic on the shift plate
  10. J

    carburator fuel line

    I just rebuild my 2 barrel card on a 2000 5.0 mercruicer inserting the rigid line in the card is a pisser so I cut the rigid line and inserted a 3/8 fuel line with hose clamps but now the engine starts but the only way it stays on is if I throttle it. so question is this invention I did not...
  11. J

    Trim Pump Question

    My trim pump pump when you press the button on the shifter it click on the pump until the trim pump activates where can I find the relay for this the pump is a 2000 its a SAE J1171 Marine or can they be fixed
  12. J

    Need feedback on starter motor

    I have a mercruiser 5.0 engine my starter motor when bad need feedback on after market marine starter or should I but merc brand
  13. J

    hard to turn

    just got a 18ft 1996 boat with 115hp Yamaha outboard the steering is pretty hard we de attach the Teleflex from the engine and the steering is very smooth so the problem has to be at the engine we grease the fitting and its very hard like no grease is going thru any sugestion
  14. J

    2000 5.0 merc. inboard turning motor by hand

    I think my starter motor is bad want to turn the motor by hand placing a socket in the fly wheel do I turn clockwise or counter clockwise
  15. J

    Trim Sender Question for the Experts

    finally got my new trim senders I followed the cables thru the transom (I have a 2000 alpha 1 gen 2 drive everything is off rebuilding all the bellows and hoses) but and this is the big question the port side sender does not connect to anything back there its just wrapped up and zip ties to the...
  16. J

    Need Advice exchaust bellow or exchaust tube

    need the pro alpha 1 gen 2 / 2000 replacing the U joint bellows, water hose and gear hose boat has an exhaust tube in place of the exchaust bellow which is best
  17. J

    U Joint Bellow Question

    Ok one more question on the bellows where the clamp is the bellow have a flat side on both side does this go up and down or on the side another question when I put the hinge pin in should I use lock tite and torque to proper pounds I thing I read is 90 lb
  18. J

    Bell housing oil hose question

    doing a mayor new parts replacement in the gimbal area new bellows, water hose, etc having problem locating the small gear oil hose in area boat dealer can this hose be replace with a standard hose from an auto part store I found one that is the same size as the original
  19. J

    Trim sender adjustment

    well finally working on removing the bell housing. had to heat the hinge pins to remove, notice my trim sender both side cables are toast so going to replace them is there instruction on how to set them when I build everything back up again
  20. J

    Carburator gas line

    just installed my rebuilt carb. it's leaking in the gas line connection can I use regular Teflon the white one used in plumming for the treads or is there a special gas Teflon to seal the threads
Top