1992 XR6 150 reed adapter plate hose barb

[Huntchuks]

While beating on my reed adapter plate to dislodge the gasket from the engine, I accidentally hit one of the tiny hose barbs on the side and broke it off. I'm not sure if those were a press fit or what but need to know if anyone has ever replaced one. Also need to find a suitable replacement barb.

 

[dingbat]

While beating on my reed adapter plate to dislodge the gasket from the engine, I accidentally hit one of the tiny hose barbs on the side and broke it off. I'm not sure if those were a press fit or what but need to know if anyone has ever replaced one.

Guessing they are pressed…given there are no means (hex) which to screw it in

 

[Huntchuks]

Guessing they are pressed…given there are no means (hex) which to screw it in

Yep, if I could find a same size replacement with threads, I could drill and tap right next to the original after plugging the original.

 

[dingbat]

Yep, if I could find a same size replacement with threads, I could drill and tap right next to the original after plugging the original.

Wouldn’t take much to press one back in

 

[Huntchuks]

Wouldn’t take much to press one back in

Right, might be hard to find a replacement. Haven't tried yet. I was hoping someone has done this and knows of a supplier.

 

[dingbat]

Right, might be hard to find a replacement. Haven't tried yet. I was hoping someone has done this and knows of a supplier.

Should be able to get from Mercury if nothing else