CD-13 "Barn Find"

[HighTrim]

Re: CD-13 "Barn Find"

Other things to note. Use OMC Gasket Sealing Compound on the threads, and after a couple high speed runs, re torque the bolts. Then you are done.

Be sure to dress the head before installing. Don't think I have ever found one that doesn't need any attention.

 

[nwcove]

Re: CD-13 "Barn Find"

Like so. Final torque value is 45 ft/lbs, but as mentioned, do this in 2 passes. Here is the sequence.

View attachment 209110

45 ft/lbs?

 

[HighTrim]

Re: CD-13 "Barn Find"

45 ft/lbs?

LOL sorry Im just used to typing that for flywheel nuts! So sorry.

Meant to say 60 to 80 INCH/lbs.

Thanks Tim.

 

[MarvK]

Re: CD-13 "Barn Find"

60-80 inch/lbs is what I found too.

Thanks again for all the info guys.

Marv

 

[MarvK]

Re: CD-13 "Barn Find"

Installed the new head gasket and dressed the head last night. Now I get 65psi in the top cyl and 70psi in the lower cyl. Put it in the barrel and she's running again. :joyous:

Now, onto the next part of the project, the lower leg. I'll start a new thread on it.

Marv