pic of work so far

[jcsercsa]

Re: pic of work so far

I'm figuring on two sheats of plywood what i was wondering about was how much resin and stuff i need?

OOOHHH ok uummm well I used polyuerthane to seal it what a quart of that , and some pl prem,and 7 or 8 years of glass ifyour going to do the hole deck , and what 1 gal of poly 2 just to be sure !!! John

 

[ne7800]

Re: pic of work so far

7 or 8 layer? wow i was going to do one lol

 

[jcsercsa]

Re: pic of work so far

7 or 8 layer? wow i was going to do one lol

hahah YARDs lol

 

[ne7800]

Re: pic of work so far

hahah YARDs lol

Whew good lmao

 

[jcsercsa]

Re: pic of work so far

Ok Guys and Gals

Today is going to be a long one !!!! I am hoping there is painting going to happen !!! just turned off the heat , and the kids walked out the door !!! so I am going to hit it !!! going to start from the bottom and work my way up , with the wet sanding !!! Wish me luck !!!! John

 

[redfury]

Re: pic of work so far

I found out where to find the code, it's on the control module by the jack, but it's on the backside of it, so I'll have to do some finagling to see it. I also found out how to program our own codes, so that's pretty cool.

The truck needs a little bit off rust attention, but for the age and where I am, it's really minor...beyond that it's pretty much drive and maintain once I figure out what is causing the ABS to kick in when the truck comes to a complete stop ( randomly )...probably a missing "tooth" on the speed sensor ring. That would explain why it is random.

Looking forward to seeing some shiny paint on that boat today John!

 

[ne7800]

Re: pic of work so far

once I figure out what is causing the ABS to kick in when the truck comes to a complete stop ( randomly )...probably a missing "tooth" on the speed sensor ring. That would explain why it is random.

I had a taurus that did this and i found the best fix was to disable the antiSTOP breaks

 

[ne7800]

Re: pic of work so far

Ok Guys and Gals

Today is going to be a long one !!!! I am hoping there is painting going to happen !!! just turned off the heat , and the kids walked out the door !!! so I am going to hit it !!! going to start from the bottom and work my way up , with the wet sanding !!! Wish me luck !!!! John

good luck John!!!! can't wait to see it

 

[jcsercsa]

Re: pic of work so far

Well all

My arms and hands are killing me !!! The top is done sanding and so is the starboard side and most of the port, just have to hit the lower part there and the bottom !!! yea i knoiw i said i was going to start with the bottom but I got out there and wanted to see how the transom was going to turn out !! And it looks great there is 4 chips that are going to stay in it !!!!! but she really looks great , soo smooth !!! the dash is great and so it the starboard side is just as smooth as can be !!!!! it really looks great , Jeff came over and helped me out I would sand and he was wipeing her clean after !!! then it was hit the ruff spot a little more !!!

Well now she is really ready for paint I got about 3 more hours left then I can paint !!!!!! Man cant wait !!!!! john

 

[North Beach]

Re: pic of work so far

I had a taurus that did this and i found the best fix was to disable the antiSTOP breaks

ne, there's something reaallyyyy scary about that post

 

[jcsercsa]

Re: pic of work so far

I found out where to find the code, it's on the control module by the jack, but it's on the backside of it, so I'll have to do some finagling to see it. I also found out how to program our own codes, so that's pretty cool.

The truck needs a little bit off rust attention, but for the age and where I am, it's really minor...beyond that it's pretty much drive and maintain once I figure out what is causing the ABS to kick in when the truck comes to a complete stop ( randomly )...probably a missing "tooth" on the speed sensor ring. That would explain why it is random.

Looking forward to seeing some shiny paint on that boat today John!

Cool there mike , how hard is it to get to that ring ?? I know you wont have a problem pulling her now !! Hows the wife like it ?????? John

 

[jcsercsa]

Re: pic of work so far

ne, there's something reaallyyyy scary about that post

HAHAHAHAHAAH

 

[83mulligan]

Re: pic of work so far

don't let up now! hmmm, wondering what the murphy guy is up to tonight.....

 

[jcsercsa]

Re: pic of work so far

don't let up now! hmmm, wondering what the murphy guy is up to tonight.....

SSSS'HHHHH let him sleep !!! we dont need to hear from !! eather one of us !!! LOL John

 

[ne7800]

Re: pic of work so far

ne, there's something reaallyyyy scary about that post

if you disable antilock breaks then there just normal breaks

 

[redfury]

Re: pic of work so far

The exciter ring apparently is part of the wheel bearing assembly, so it'll be a bit of a thing to get to...nothing I can't do though. The wife loves the Ford, and I'm really liking it too ( more power! ) I got the exhaust parts for my Dak today and got the exhaust off only to find out that the muffler they gave me has 3" inlet/outlets and my truck is only 2 1/2"! So, I gotta bring the Cherrybomb back Hopefully they will have one in 2 1/2" for me so I can get this truck up and running again! I was so excited to get it done today and now I have to wait on a muffler

Murphy, the bastard, is over here John, so don't you worry...he's got 2 state lines to cross before he gets back to you!

 

[jcsercsa]

Re: pic of work so far

HAHAHAHAHAAH SO Sorry Mike but please keep him over there !!!!!!!!!!!!!!!!!! lol too cool glad she and you both like it !! it looked petty clean like you said !!! John

 

[jcsercsa]

Re: pic of work so far

Man Guys , my hands are so sore , stiff !!!!! But she is looking great !!!!!! An't going to get to the rest today but tomorrow , Think I am working early so should be able to finish sanding this round tomorrow !!!!! MAn she is soo close !! Want to call in , but will save my Personal days for this summer !! LOL John

 

[zach103]

Re: pic of work so far

im catching up.. better pick up the pace and get some pictures

 

[jcsercsa]

Re: pic of work so far

im catching up.. better pick up the pace and get some pictures

Can't Rush perfection !!!!! LOL If you got a min, i will tell you somemore !!! LOL

I am hoping tomorrow night there will be paint going on , if not the sat, afternoon !!!!!! John