Radar 10x raytheon

Vinnys

Seaman
Joined
Jul 17, 2011
Messages
67
I have been getting Bearing zero pulse error on my screen. Any Ideas?
I have a problem finding the 6.3 amp fuses for this unit. I found ones in 250 volt not 12. How bad is that? Can they be used?
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,317
Fuses are rated by maximum allowable voltage. It's the amperage rating that matters
 

SteveMcD

Petty Officer 2nd Class
Joined
Mar 21, 2011
Messages
182
My radar has a microswitch that is cam operated at 0 degrees. Seen a 0 degree switch on another radar too. My guess is yours has one too. The 250 volts is the maximum voltage rating of the fuse. It has nothing to do with the current rating. It is probably the most common rating I have seen. You can use them all day long. 6.3 amps is strange sounding, though.
 
Top