Thanks for the help.

[mountainboy]

Re: Thanks for the help.

A lot of folks have helped me out tremendously. I really appreciate this board. Thanks, Guys!!

 

[xikxak]

Re: Thanks for the help.

All the above sentiments to all those named above and to those who have been missed.<br />Also thanks for the"DUMB" questions I picked up a lot of smart tips from the answers.<br /><br /><br />ps: this board should prove there is no such thing as a dumb question.

 

[duck64]

Re: Thanks for the help.

This is a great forum. I help when I can and I'm always learning something from all the othet people who post. There are the obvious "knowledge" guys like JB, DHadley, Paul Moir, Joe Reeves, ob, DHPMarine, R. Johnson, and others, but many times I pick up things from just the common "help me" posters. Its really great when a solved problem gets posted and I can hear what solved it. Thanks Iboats.

 

[alderman]

Re: Thanks for the help.

Thanks to all who have helped with my questions and problems. This is by far the best site for boaters. Thanks IBoats for making it available, and thanks again to all who donate there time and efforts hear.<br />Keep up the good work.<br />Ray

 

[imstillatwork]

Re: Thanks for the help.

Thanks to all! my first questions here were answered the same day I posted!

 

[BoatBuoy]

Re: Thanks for the help.

Like some of the rest, my knowledge is very limited but I help whenever I can. I thank those vastly more knowledge than me for helping me with my challenges and answering my novice questions.

 

[phatmanmike]

Re: Thanks for the help.

ps. <br /><br />what kind of prop should i use? my motor seems slow?<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br />.<br /><br /><br />hahahahaha'<br /><br /><br />thanks to all you guys who ACTUALLY answer these posts, and keep a straight face!

 

[jsfinn]

Re: Thanks for the help.

Thanks to everyone for everything. Because of this forum, I really feel like I can do anything with a little help from the people that have done it before me.

 

[blue90]

Re: Thanks for the help.

Yes, yes,yes... agree whole heartedly with positive responses.<br /><br />I purchased what seemed to be a well cared boat and engine...two days later when running it alone for the first time it would not go in reverse...<br /><br />Seahorse and 12vmac responded to my post and provided me an analysis that turned out to be EXACT!!! <br /><br />Thanks guys and all involved with this forum!!

 

[Javelin 353]

Re: Thanks for the help.

thanks to all I can usually find my answers just by usuing the search feature. Hope this site is always here usually check it every day . THANKYOU IBOATS and all of The SMART ONES

 

[Cboat]

Re: Thanks for the help.

This is the best source of boating information in the world. Thanks to all, especially Joe Reeves, who helped me decide on the best little outboard I've ever dreamed of owning!

 

[jim dozier]

Re: Thanks for the help.

I just wanted to thank the people who have responded to my questions. Thanks to DHPMarine, Rodbolt, Seahorse, OB, OBJ, GDane, Walleyehed, R Johnson, Alcan, DHadley, and many more. I have answered a few questions on these forums myself from time to time when I thought I could help. I recently purchased another outboard of a different make and no matter how much you know about one motor its always a help to be able to ask a specific question about a new motor when something isn't clear in the service manual (like that ever happens ) I don't care how smart you are, experience rules and thats what this board gives you, everybody's elses experience.

 

[Beck]

Re: Thanks for the help.

Well I would like to add my THANKS to all that have helped me in the past. It would be hard to remember everyone because there were many.<br /><br />I have been reading this forumn for sometime before I started asking questions. It was just too neat reading all this info. about boat motors and suggestions about boats. I find myself just sitting and reading for hours on end.<br /><br />Just a note, I did finally get an OEM manual for my 48 spl and It is amazing how different it was from the Seloc manual I bought last year. Very informative.<br /><br />Thanks again to ALL. <br />Beck

 

[bubbakat]

Re: Thanks for the help.

My thanks goes to J.B. ,obj, ob,dj,joe reeves,paul ,<br />got so many woops jasonj, Man I can't think of them all. Even snoopy,schematic.<br />I purely love evenrude and johnson motors. oopps<br />Dehadley There is some missing but to all youse guys a big thanks from the bubbakat

 

[Fly Rod]

Re: Thanks for the help.

I have absolute praise for all those that have helped out with the Questions and Answers on this forum It's like a big book of knowledge,an encyclopedia 1st on the scene when I came aboard in October of 2002 with questions of a blown powerhead was, Dhadley,Bear, rickdb1boat, lubedude, and others!!!!!

 

[Cricket Too]

Re: Thanks for the help.

From the first 5 minutes I was on this site, I realized that it was the best site there was and I was hooked. It's good to know that if you have a problem with anything imaginable, you can post it here and there are people who are more than willing to help, and when you check your post in the morning you will have an answer or a good direction to go in. This is definitely a great place for people who want to learn and for people who are infatuated and sit here for 4 hours reading and drinking beers and before you know it it's 3am. Thanks to everybody who has helped me out in the past, from the pros on down, every post helps people out, even if it's just a question that can get somebody thinking. This site is the true meaning of the internet, people all over the world helping each other out. Thanks to everybody who started this site and maintains and moderates it, it is very much appreciated by all.<br /><br />Mike

 

[jtexas]

Re: Thanks for the help.

JB, <br />Good idea, but let's not let it replace the final posting of the resolution within the thread where the problem is described.<br /><br />Would also be a good place to mention when you get a solution from somebody else's thread who had your same problem, I've gotten some valuable advice from other peoples' troubles that wouldn't have been as good without the feedback. Sometimes I remember to toss in a good word - I'm sure to remember with a sticky thread like this at the top.<br /><br />thanks!!

 

[tabbott]

Re: Thanks for the help.

Hey JB, <br />Funny I came upon this post after posting thanks about my recent problem. I'm all for it. It was you who replied to my shift linkage problem in minutes after posting. You were right and I'm now fixed. Thanks for your expert assistance and time.<br />Tim

 

[mattsaks]

Re: Thanks for the help.

It still amazes me how many people give their time, knowledge and experience on this forum. I would not be able to run my boat without all the help i have received! Especially Elvin in the Tohatsu section. Big thanks for all your help. To others that have given advice like rodbolt, Dhadley, JB and many more you guys are legends.<br />Lastly, thanks to iboats for making it all happen.

 

[Marc J.]

Re: Thanks for the help.

Thanks for the help guys. The knowledge dispensed here is invaluable to myself and others. No where else on the net have I found a group so friendly and helpful. I hope no one minds when I throw my $.02 in. I just hope to help others (when I can) and pass on what I have learned to date. You guys are the best.