Search results

  1. 73 Dolphin

    2003 50hp main harness and side control box model #s needed!!!!!

    Can anyone please tell me what 20 wire harness and which side control box I need for a Honda 2003 50hp ? (BAZS-3304031) LRTA Model numbers if you have them so I can buy them and finally get the boat working. Thank you, thank you and thank you in advance!!!!!!
  2. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    It's not a Chinese knock off. Like I said it may be a 20hp remote which I'm guessing has different wiring as the controls and 20 wire harnesses are listed to 20hp then again from 25-250hp. (2 different types although the bodies are identical on the control boxes it seems) If so then yes the...
  3. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Apologies for the crappy drawing but... the connectors on the left are from the side control. They are the 4 and 6 pin connectors.... On the right are the connectors from the main wiring harness. They are drawn the way you see them looking at them. So they are mirror images. So the 6 wire...
  4. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Like I said. Those two plugs do fit but the wire colors dont match. Mind you that's the new 20 wire (14 round) I bought for the motor hoping it would match the remote I had to buy. So in other words. New 20 wire and new side control match connectors but not the wire colors. And the wires colors...
  5. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    The motor mounted tilt works and yes it can be jumped to crank. None of the plugs match up. I totally get that they should. But they don't and that's the help I am looking for. Instead of re-writing it all again here basically I never had the control for this motor.The 20 wire harness plugs...
  6. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Still no joy here. The Honda parts diagram for my exact motor shows the internals of the correct side control supplied at the time(2003). It doesnt show the model number of that control (item 4). This also means any other parts supplier has the same info. Usually it says something like item 4 (...
  7. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    That's what I'm hoping. Its a 2009 AB nautilus 11 dlx RIB which came with a 2009 Yamaha 40hp. Originally I looked for the same motor to re-power and found that there were many listed with the same issue. No compression in top cylinder. His had zero in the top 2 and 155 in the bottom. It had very...
  8. 73 Dolphin

    Help identifying Honda side control

    I should also have said that it did not come along with the motor I have.
  9. 73 Dolphin

    Help identifying Honda side control

    Is there a way to identify the exact model of a Honda side control by looking at it? I have a used one that I dont see any kind of model number on. Is there a place I should be physically looking at on the control? Thanks!
  10. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Ahicks - Thanks!! That all makes sense.I'll give it shot later. I hadn't thought about the choke circuit. I still need to work out what control I have if I can find some sort of model number on it but like you said if turns over and the tilt works then all is good. I'll post the results later...
  11. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Thanks for the reply. The wire plugs from the side controls (pic 5) match two of the plugs from the forward end of the 20 wire harness (pic 4) except that the wire colors are not matched. Sorry I thought I'd said that. If the colors matched pin to pin I'd figure that s how it goes. They do...
  12. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    The motor is a 2003. The serial number is BAZS-3304031. The cable is 32205-ZY6-015AH The control - I have no idea of the model number. Honestly looking for the side control needed for this motor was so difficult with diagrams available for spare parts for the controls but no where could I find...
  13. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    Finally so you get to see exactly what Im dealing with heres the new side control. I bought it locally. I have no idea of which model number it is. I dont know where on it to look for a model number.
  14. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    And here's the connectors that I have on the side controls.
  15. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    This is the new cable (not yet installed). It has the extra plug that I dont see on the old one. The control end is completely different.
  16. 73 Dolphin

    2003 Honda BF50 LRTA wiring help!!!!

    I'm re powering a boat with a 2003 Honda BF50. I bought a new 20 wire main cable for the Honda. The one that is on it ,I now discover, only had the main round plug wires and not the addition plug on the new cable with 6 wires. Also the control side of the cable is completely different from the...
  17. 73 Dolphin

    Merc 2006 50 hp 2 stroke carb tubing size help

    There's a bunch of mercury "carb tubing" part numbers. None of the 8 or so that I saw come back to my motor and the vast majority are good for model years up to 1995 for some reason. I'm not trying to find the size because I'm cheap and not wanting to pay Merc/ Quicksilver prices. It's because I...
  18. 73 Dolphin

    Merc 2006 50 hp 2 stroke carb tubing size help

    It's unreal that a company that has made hundreds of thousands of outboards cannot either list the tubing size or tell you what it is! There really shouldn't be any kind of issue finding it!! Hopefully the 3/16" will work. If not maybe try to find some 11/64"
  19. 73 Dolphin

    Merc 2006 50 hp 2 stroke carb tubing size help

    I decided to order 3/16 internal 5/16 external tygon with 1/16 wall. I WILL report back if it works in case it helps someone else.
  20. 73 Dolphin

    Merc 2006 50 hp 2 stroke carb tubing size help

    So I did find a drill bit that fits. The shaft measures .182" 0r 4.62mm Neither of those is a real value. ( go figure ) So its either 11/64" = .171875" ( 4.3656 mm ) or 3/16" = .1875" ( 4.7625 mm ) Thats a .015" difference between the two. The smaller dia is .010" under the size of the drill bit...
Top