Search results

  1. 1

    2019 E-Tec 150 HP

    C150HWXFAFB KK 055631478 These are the Tag # on the side of the motor. Thanks/Jerry
  2. 1

    2019 E-Tec 150 HP

    The Steering acts like it needs bleeding, it makes noise on start up and it also seems to skip before turning the wheel all the way. Looking for the correct procedure on bleeding the Helm system.
  3. 1

    How to adjust the Trim Travel on Mercury Sea Pro (150 HO 2021 year model)

    Perfect, I'll give this a try and report back, appreciate the help. Jerry
  4. 1

    How to adjust the Trim Travel on Mercury Sea Pro (150 HO 2021 year model)

    The procedure is what I'm looking for, it's not in my manuals and I have all the original manuals. Can you direct me to the procedure?
  5. 1

    How to adjust the Trim Travel on Mercury Sea Pro (150 HO 2021 year model)

    When I raise the motor out of the water it hits the rear seat rod holder and scratches the Cowling, How can I limit the travel on this motor? Thanks/Jerry
  6. 1

    Boston Whaler Seat Measurements 11' (1978)

    Looking to build my own Mahagany Seats for a 1978 11' Boston Whaler, trying to find the correct measurements to cut the wood. I found the hatches listed on the web, just can't find the seats/rails that hold them down. Any help would be appreciated. Jerry
  7. 1

    1998 225 HP Outboard (Trim Motor Question)

    I have a 1998 225 HP Mercury outboard that needs a new Trim Motor replaced, the model # is 225XLEFI. The motor has 2 screws that need to be removed, the front screw is easily accessible, but the back screw isn't. It looks like the entire Trim Unit needs to be removed to access the second screw...
  8. 1

    1990 175 HP Jonhson Oil Reservoir bypass question

    you were correct, just unplug the VRO system and plugged the oil line. Worked fine. Thanks
  9. 1

    1990 175 HP Jonhson Oil Reservoir bypass question

    I have a 1990 Johnson 175 HP that was removed for a repower, during the repower the Oil tank was lost. I now have it on a stand getting ready to start it, can I just run pre-mixed gas through the VRO system and just cap off the oil intake tube? if so could I get an oil alarm? Jerry
  10. 1

    2012 Honda 15 HP (Water not Peeing at Idle)

    2012 BF15D3SHS 15 HP Honda with a tiller setup, the motor doesn't pee hardly at all at Idle, when I give it some throttle it pees pretty good. The motor doesn't seem to overheat and will run fine. Today I changed the Water Impeller and nothing change, while I had the lower unit off I checked the...
  11. 1

    Prop Recommendation for 2022 150 Sea Pro Mercury Outboard

    Installed a new Stainless Prop, gave me quite a bit more power. When I purchased the new motor the dealer used my old prop, it must have been slipping when under a load and I just assumed that how the new motor ran. The extra weight in the boat the day it completely failed was the last straw...
  12. 1

    Power trim goes up, not down

    Based on your test it shows both relays worked, look into the switch that makes it go down. Again your test also shows the pump worked based on your work around. Got to be either the switch or possibly another solenoid inline with the relay.
  13. 1

    Prop Recommendation for 2022 150 Sea Pro Mercury Outboard

    WOT is rated @ 5300 for this motor. Will a prop slip easier with more weight in the boat, normally I only have me/1 other person in the boat. Yesterday I had 5 and that's when I notice the prop slipping? I'm not necessarily looking for more top end speed, but more throttle power when driving...
  14. 1

    Prop Recommendation for 2022 150 Sea Pro Mercury Outboard

    Just spun a 17"prop on my new 2022 Mercury Sea Pro 150 HP, need to replace. The motor is on a 20' SeaRay Center Console, the 17P Prop might of had some slip in it all along as it only has 30 Hrs on it. The motor felt a little under power, when I purchased the new motor we used the prop off the...
  15. 1

    2013 E-Tec 250 (E250DPXABA/S# 5396595) Hard Start

    Final Update... After having all 6 injectors inspected/cleaned and replace the starting issues have been resolved. Not all 6 were bad, but none of them passed the inspection completely. Had all 6 cleaned and reinstalled. With injectors failing independently the systems seems to vary from...
  16. 1

    New SeaPro 150 HP (Fuel Ball Question)

    Thanks for the input, just seemed odd for us old timers. But it does seem to work just fine.
  17. 1

    Just purchased the new Lowrance HDS9 Live Fish Finder, I have a transducer question.

    Thanks, I'll take a good look and see if it's mounted to close to the engine, I may be able to move it over some. Just like to increase the speed of travel and still see the bottom fish, after I make an adjustment I'll post whether or not it made an improvement.
  18. 1

    Just purchased the new Lowrance HDS9 Live Fish Finder, I have a transducer question.

    The HDS9 Live Lowrance Fish Finder came with a 3 & 1 transom mount transducer, it works fine with the exception of having to slow down to 2 or 3 KTS before it picks up the bottom. How can I improve the speed I travel and still see what's happening? Jerry/Thanks
  19. 1

    New SeaPro 150 HP (Fuel Ball Question)

    Just purchased a new Mercury 150 SeaPro Outboard, the installation folks say a fuel squeeze ball is now longer required. They said if I want to add one that's fine, just not required. Does this sound right? Thanks for any input.
  20. 1

    Trim question for the new 150 HP SeaPro Outboard.

    These orange wires discussed in this link doesn't exist on the new 2021/2022 Mercury motors, still looking for a solution. Thanks/Jerry
Top