Search results

  1. C

    AC voltage 1990 evenrude

    just make certain the 25vac is reaching it...otherwise no output !!
  2. C

    1960 Evinrude 5.5 fisherman outboard

    if the carb float is ok the carb may just need a good cleaning.. points can sometimes just be polished (burnished & acetone washed ) and still work fine ... even better than newer points manufactured out of specs !! stick with OEM stuff. some chinesse kits have been known to have "melting...
  3. C

    Stator/CDI alternative test

    best not to revive old posts .... post is 6 years old so it it fixed or sold ! as to the stator it is just wire coils energized by the FW so coils can be bad in few ways ... open... grounded shorted out of specs all of which will produce no or low ac volts at a given RPM...
  4. C

    1960 Evinrude 5.5 fisherman outboard

    first thing is to look at on line sites like Craiglist EBAY etc... visit boat shops..(some accomodate clients wishing to sell stuff) try to stick with freshwater engines around here they go from $100-200 CDN $ check compression before you buy and it turns over. a run test is...
  5. C

    Engine warning light Evinrude Ficht RAM 2002/2003

    you should not have frozen water if stored properly & vertically check manual for code 22-27 do appropriate voltage readings with VOM on the 12 volt distribution .I doubt high temps influenced the alarm code 43 may indicate a water problem..did it pump water ok before ?? just my...
  6. C

    Spark or No Spark?

    the motor won’t run, but will fire on starting fluid…..not on fuel mixture….sprayed into carb throats. so why doesn't fuel reach the cylinders if it fires up on starting fluid.. I read lots of electrical.. .work... what about carb work ??? are they full of fuel mix ??
  7. C

    Pre-emptive repair/maintenance to do on a used Evinrude 9.9?

    here is what a $50 ..... 1966 9.5 looks like when given TLC.... your looks like an abused fatherless child
  8. C

    Pre-emptive repair/maintenance to do on a used Evinrude 9.9?

    looks beat up to me the innards are probabaly beat up also ....
  9. C

    Engine warning light Evinrude Ficht RAM 2002/2003

    Glad you found it.... hopefully your on your way fishing :) thanks for your feedback yet the mystery..... why was black ground missing but it is accademic now. :)
  10. C

    Old motors DEMAND to be retired when they are 65 years old..

    The Vega was quickly coined the "Déga" up here in Québec. :) Transalation: Déga: total mess, a desaster, a pile of s... ok back to OBs
  11. C

    Engine warning light Evinrude Ficht RAM 2002/2003

    see manual on 20002-6 FICHT sect 3.41.. + my understanding is that he CPS is a AC signal generator and would normally be without DC voltage . it has OHMS resistance to check and if your engine does start.... it is working otherwise the EMM would interrupt the start process. as to ats...
  12. C

    Help! 2000 Johnson 90hp V4 overheating on one side only...

    time to dig in...if ph removal not your option try to fish some heavy mono line in the cavities try air pressure , try the cyl head removal to get a better look inside the jackets.. etc...
  13. C

    Old motors DEMAND to be retired when they are 65 years old..

    remember th Pinto.. the Vega....and several others with rust perforations within 2 years... not anymore my grand son's kia Koop 2010 is like new :) and was never rust proofed for Canada's salty roads anybody changed a muffler lately...!
  14. C

    Engine warning light Evinrude Ficht RAM 2002/2003

    btw post your engine mdoel # ... !!! see one search on a temp anomaly code 49 on ETECs but was present on older FICHT .. program got corrected with a SW update https://www.etecownersgroup.com/post/air-temp-sensor-fault-8064103?highlight=emm%20version%20list&trail=45
  15. C

    Oil injector/manifold routing Evinrude Ficht RAM 90 hp 2003

    oly's brew is a very limited oiling ratio and was eliminated in the design of later ETECs around 2007-2008 the engine should still run without the mixing in the fuel line.
  16. C

    Engine warning light Evinrude Ficht RAM 2002/2003

    something wrong for certain EMM should reflect reality 115hp next thing is to fix the sensor fault check your injector tags to see if they match the EMM log if not EMM was substitured or eprogrammed for some reason. Unfortunately there isn't much info to the level of detail you...
  17. C

    1976 6HP Johnson Outboard issues with idle and starting

    no need to tap hard . To remove... Drill a small (NOT DEEP) hole in the plug and use a pick or small nail to just pry it off. When done cleaning everything incl side channel.... the new one is fitted in and I use a square head (Robertson) screw driver to tap it in (not to much just...
  18. C

    E90ELEUC Starter housing blew apart? Not sure what happend. Please assist!

    after you find and fix the cause ... if you don't want to spend $131... line up the cracked pieces and weld them from the underside. See several utubes techniques on welding plastic parts (glues usually dont work to good as these things are usually polypropylene based plastics) I used...
  19. C

    Help! 2000 Johnson 90hp V4 overheating on one side only...

    This is a sudden problem after I had the motor serviced for a new impeller and a carb tune it happened the very next trip. There is certainly relation or coincidence with the servicing of your engine and this " new " condition ... If the shop is reputable they may take it back and have...
  20. C

    Help! 2000 Johnson 90hp V4 overheating on one side only...

    can't say but the water flow under thermostat control may not be sufficient to provide the same cooling as a wide open flow with no thermostat., if you do not feel like pulling the cyl head try a new set of thermostats has suggested by saltchuckmatt to get even temperatures on both...
Top