Search results

  1. T

    Tell tale getting clogged '96 200hp Oceanrunner

    I’m not familiar with your model but can say I removed mine years ago and just run a longer section of hose that sticks out an 1” or so but I don’t have to deal with clogs anymore.
  2. T

    Gas Tank Removal 4hp

    Looks to be a 79 model. You can look for a parts diagram to help guide you through the removal process. Might even find one here on IBoats. Just enter your model number on a parts page. Best
  3. T

    I’m at a loss - Evinrude 40

    Enjoy your day
  4. T

    I’m at a loss - Evinrude 40

    The timing light would be for looking for a miss. Nothing to do with the timing. A proper through link and sync procedure may help you to be sure butterfly opens when it should as opposed to how it should. You have nothing to lose by doing it.
  5. T

    I’m at a loss - Evinrude 40

    I have an 02 40hp on my homemade 18’ plywood skiff that will clock 35 on the gps on flat water.
  6. T

    I’m at a loss - Evinrude 40

    Maybe I missed it but have you run with a timing light yet or done a link and sync?
  7. T

    1984 Johnson 35hp tell tale at idle

    Yea it’s time for a water pump kit. That impeller is toast. They should be soft and pliable and the fins should be straight. What you have is called set and you don’t want that. The tips looked burned as well so it was likely run dry at some point and melted the housing. Imagine back in the...
  8. T

    1995 25hp Johnson 2 stroke, what are the best years for the 25 hp?

    What is the 12’ inflatable rated for. That’s a lot of motor for a little boat.
  9. T

    10mph at WOT 99' 25hp

    Maybe time for a water pump service. If it’s overheating it will lose some power.
  10. T

    1977 Johnson 35 - Won't start

    When you get a new fuse grab a couple extras. Toss one in the tool box and tape one under the cowling.
  11. T

    1977 Johnson 35 - Won't start

    In my eyes by-passing a fuse is a bad plan and can cause much bigger $$$ problems. With a little luck the fuse just gave up but there may very well be a reason it gave up.
  12. T

    Out on the Lake Pictures

    I did it again That was meant to say It looks like you’re a good friend. Best
  13. T

    Out on the Lake Pictures

    Looks like a good friend. Glad they had a great time.
  14. T

    1957 Johnson 18hp.

    I would guess it has a shear pin if its the original prop. Pop it off and see what find.
  15. T

    Help with noise

    Any chance of a video?
  16. T

    1990 175 xp overheating at idle

    It’s always easier after the first time around. If you were only getting hot at idle it’s possible you’re not pumping enough water at idle. If you’re lucky the impeller will still be intact and not broken up and causing a blockage. How long has it been since the last change?
  17. T

    1990 175 xp overheating at idle

    Why not do the water pump while you at it.
  18. T

    Need 100 hp manual

    Agreed If you do look for a vid try Danger Marine. He puts out some good vids and may have one that will help you.
  19. T

    Sea foam for outboards?

    When you put it like that it all makes sense. This happened nearly 40 years ago and I never really put that much thought into until today.
  20. T

    Sea foam for outboards?

    Honestly Jimmbo I never really understood it myself but an old timer told me to try it so I did and it worked and I never had a problem again. It’s to bad he wasn’t there to stop me from using the Marvels. 😂
Top