Search results

  1. T

    Evinrude 35hp +/-1980 missfire at higher rpm (lower cylinder)?

    TT is short for tell tail. Did you do a link and sync went you put her back together? Have you looking into the possibility of losing spark in one cylinder while under way? You can check for that with a timing light hooked up if you have one handy.
  2. T

    1964 Meteor 90 HP

    Trash can is the way to go. I have mine set up with a ball valve on the bottom for easy draining.
  3. T

    1954 evinrude big twin electric 25 help

    Questions is why we are all here. No need to be shy. As for the bushing groves. Some may say newer materials don’t require them. I say it’s one less step in the manufacturing process so it saves them money. As they say “They don’t make ‘‘em like they used to” As for your lock down sorry I...
  4. T

    1993 4HP Johnson

    I’m getting confused but that’s not hard to do either. In post #8 you said you had spark. Did I miss something here that caused you to lose spark?
  5. T

    1993 4HP Johnson

    Yea you do need more water. The screens are just for the pick up. The pumps are not self priming. The water level needs to be above the pump for it to work properly.
  6. T

    1993 4HP Johnson

    Put some fuel oil mix in a spray bottle or an old water bottle with a hole in the cap and squirt it into the carb. If she runs you will likely need to clean the carb. Keep us posted.
  7. T

    1993 4HP Johnson

    Go with 50:1 Do a water pump service when you do the lower oil change. If it sat with fuel in it you will likely need to clean the carb. But it’s possible it was stored correctly to just look over the fuel delivery system and check for leaks. If it all looks good see if she will run.
  8. T

    Johnson 50hp

    Push it in while cranking. Once it starts you don’t need to push it in any more. You will only need to push it in on cold starts. Once it’s warm it should fire just turning the key.
  9. T

    Looking for guidance please

    Thanks for stopping in and letting every know how it turned out. That’s always a big help to others reading through the post. Glad you had success. Best
  10. T

    Johnson 50hp

    Is this a new to you motor or a new problem? Can you explain your starting procedure?
  11. T

    60HP 1989 Johnson outboard low compression

    It’s pretty short video but it doesn’t sound to bad. Keep in mind it’s not a modern day motor and it will never sound like one. Either get it in the water or in a barrel so you can get some back pressure on the exhaust and let her run for awhile and get good and warm before trying to work out...
  12. T

    Engine Ticking - 1998 Evinrude Ficht 175

    Every Fitch story starts with I got a great deal.
  13. T

    Help please! 1988 Johnson outboard lack of power and stalls.

    Yep I miss understood what you said. Flywheel keys can and do sheer. The flywheel only needs to rotate a tiny bit to throw off the timing. There is only one way to know for sure and that is to check. It’s a free test and you can rule it off your troubleshooting list.
  14. T

    Help please! 1988 Johnson outboard lack of power and stalls.

    Maybe I miss read your float adjustment procedure but did you adjust the float with with carb right side up or upside down?
  15. T

    Another day another motor, another problem. Help, please

    Hum I’m not sure what the numbers should be for that motor but it does seem low to me. I’m sure others will chime in.
  16. T

    Another day another motor, another problem. Help, please

    Have you done a compression test? If so what were the results?
  17. T

    Fuel Pump Bad?

    Some of that crap is probably jammed up in the pump and causing it to leak. That pump needs to come apart. As mentioned they are easy and cheap to repair and far better than anything you can buy today.
  18. T

    Flywheel is easy to spin without spark plugs

    If your battery only has 12 volts it’s just about dead. Charge the battery and have it tested.
  19. T

    Fuel Pump Bad?

    Just for kicks pull the line off the pump and pump some fuel into a glass jar and see what you get.
  20. T

    very cool carb and intake manifold causing moisture

    I see this happen on cool foggy mornings and days with very high humidity.
Top