Search results

  1. alldodge

    want to run my engine out of the boat.

    Unless you can find a USCG inspector to agree, I call this YOUR opinion only. Spewing opinion is what many do here, but don't throw the USCG in the mix unless you have proof
  2. alldodge

    want to run my engine out of the boat.

    What you have now works and doesn't need to be replaced unless you want to. It is a universal terminal board kit which is listed in link below, alnog with motor and boat side 10 pin harnesses The 10 pin connector has only 9 pins. Its called a 10 pin because it has the ability to have 10...
  3. alldodge

    Bayliner Capri 2150 resurrection.

    I noticed the seats but figured the machine shop can replace them Maybe a set of heads is cheaper then the machine work
  4. alldodge

    Bayliner Capri 2150 resurrection.

    My old eye is not seeing junk, but not there with hands on
  5. alldodge

    want to run my engine out of the boat.

    Negative Cable to the block and Positive cable to starter post. Take small gauge jumper and go from Positive post + side on the coil. This wire is hot wiring the ignition Now jump starter solenoid to crank the motor over
  6. alldodge

    Anchors and Chains.-

    Used a 3 prong mushroom on my 23 footer without chain for years https://www.walmart.com/ip/SeaSense-30-lbs-Black-Vinyl-Coated-River-Anchor/44709551
  7. alldodge

    Source for new gas tank

    Replaced my tank with another aluminum and came from Florida Marine and Tank
  8. alldodge

    5.7 piston rings

    1995 was a change over year for Merc with pistons. Also a motor might be older then the boat it was installed in because it may have been bought the year before. https://www.mercruiserparts.com/bam/subassembly/31780/1014/280
  9. alldodge

    5.7 piston rings

    What Scott said Merc did not make the motor GM did
  10. alldodge

    Hallo, i am new here and come from germany

    Being that old I would need to guess, lets see if @roscoe or @Texasmark would know for sure
  11. alldodge

    Hallo, i am new here and come from germany

    Woops they say not available EDIT: I used google and searched the part number and found a couple new old stock available
  12. alldodge

    Hallo, i am new here and come from germany

    Don't know if you can order from this location, but they have the regulator Part number 381538 https://maxrules.com/fixomcregulator.html
  13. alldodge

    Hallo, i am new here and come from germany

    The motor uses 50 to 1 gas/oil mix and the Generator is built into the motor under the flywheel. Once motor is started it should produce power to the battery
  14. alldodge

    Hallo, i am new here and come from germany

    Hallo Rainer, Verwenden Sie den Google-Übersetzer Deutsch-Englisch, um Ihre Fragen zu stellen, und kopieren Sie sie dann und fügen Sie sie hier ein. Ich habe das Gegenteil getan, damit Sie es lesen können Hellow Rainer, Use the google german to english translator to ask your questions, and then...
  15. alldodge

    2013 4.3 Mpi with 14 pin. No power to coil

    Do you hear a beep or 2 when jumping A to C? If no beep is heard then ECM is not turning ON, or the beeper is disconnected. Jump A to C and there should be a click at least, and the fuel pump should turn ON for a couple seconds then back OFF. The main power relay (MPR) energizes to supply...
  16. alldodge

    2013 4.3 Mpi with 14 pin. No power to coil

    Do you get a beep when first connected, and have you checked the fuses?
  17. alldodge

    2005 Crownline Fuel System Charge/Prime on key turn

    Give this guy a call/email, he is member @muc friend and has a good reputation. Tell him what Bob said https://www.boatunlimited.com/
  18. alldodge

    2005 Crownline Fuel System Charge/Prime on key turn

    Your getting the 2 beeps, gauges come alive when the key is turned so its not the kill switch. Wouldn't have thought Bob would have said try another MEFI 4, like their everywhere right. (n)
Top