Search results

  1. R

    Proper Controls for Johnson 9.9 HP 4 stroke

    Perhaps your local Suzuki dealer can help on this JOHNSUKI motor.
  2. R

    Dribble valve replacement

    Do you know what motor you have ?
  3. R

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Timing is fixed and set at the factory.-----Does not go out of adjustment.-----Carburetors do not have mixture adjusting screws.----No such thing as a traditional tune-up on these motors !
  4. R

    What is the biggest motor my Starcraft will handle?

    In 72 it was a light weight 2 stroke on the market.----In 72 it was a crank rated motor.-----It is totally different today.
  5. R

    1990 Johnson 70hp w/Video - Chasing My Tail

    The electric primer valve is working as designed.----That means there is pressure from the fuel pump.----Some will argue.----I suggest you remove cylinder head and inspect cylinder walls.----Head gasket is cheap.
  6. R

    1968-1972

    We have a novice boat owner here !---Possibly a wiring mess on his hands.-----I clearly stated to be careful with wiring on this 1972 motor to avoid expensive mistakes.-----Helped a novice boater a few years ago.----After stating that red goes to positive and black goes to negative I saw...
  7. R

    Need fuel lines checked

    It is not a manual choke.----It is a primer valve.----Opens when you push the key in WHILE cranking the motor over for cold start.
  8. R

    1990 Johnson 70hp w/Video - Chasing My Tail

    There was a service bulletin in 1994 to move tell tale fitting from side to the top of the block.-----Water pump kit 0432955 has the details.
  9. R

    What're these things for?

    Does a ladder or steps hang from them ?
  10. R

    1990 Johnson 70hp w/Video - Chasing My Tail

    Cleaned the carburetors 3 times ?----Likely not a carburetor issue then !!----Don't worry about oil at the plug holes.---Don't worry about the sparkplugs.----Compression is too low.----Remove cylinder head.---Easy and a head gasket is cheap.----And does tell tale fitting come off the side of the...
  11. R

    Vintage 9.5: Can you set points with a timing light?

    You are overthinking !----In my opinion it is elegantly simple using the flywheel.----Line up the marks.----Lift off the flywheel.----Set points to open with meter.----Repeat for the second cylinder.----Job is done !!----Accurate and simple.
  12. R

    1955 evinrude 7.5 hp carb and starting

    It is a sintered material.-----A very good concept and that filter can be cleaned.----Use google to learn about sintered filters.
  13. R

    Johnson 4.5 fuel issue

    Water pump impeller replaced every 5 years ??-----Do a compression test and check spark.----Sounds like it is running on 1 cylinder.
  14. R

    1968-1972

    ???----It can only be a 71 or 72 model !!!-----Post a picture if paint is original on the engine block.-----I can identify the year in 2 seconds by paint color.
  15. R

    Vintage 9.5: Can you set points with a timing light?

    I started using those timing fixtures over 50 years ago as a teenager !!----It is simple.----Today I find it just as easy to use the actual flywheel to set the points accurately !-----And you can use a timing light pointed at those 2 vertical lines to check your work.
  16. R

    Wondering why my boat drain plug is at the bottom not on the transom?

    Quite common for drain plug to be on the bottom on aluminum boats.
  17. R

    1968-1972

    A 50 hydro-electric can only be a 71 or 72 model !-----I would ignore the info in post #4.----Applying 12 volts to a black / yellow wire might result in expensive smoke !
  18. R

    9 1/2 Evinrude

    Post compression values and check for spark.-----Might be running on 1 cylinder.
  19. R

    RDS-22 1960 40HP Johnson

    Best to do a complete evaluation before spending any beer tokens on this motor.
  20. R

    1968-1972

    Just be aware that 12 volts from battery is not used to make spark at the plugs.
Top