Search results

  1. alldodge

    Volvo penta 3.0

    Some have used JB and done well and some not so good. Get it real clean prior to using and chances are good
  2. alldodge

    91 four winns 285 winterizing question

    The water system from the drive is not connected to the HW heater. There can be a connection between the engine block and the HW heater to warm the water, but I'm talking about the fresh water which comes from the holding tank or shore connection Post a pic so we can see
  3. alldodge

    Ford 302 issues

    I understand, but your saying the coolant is pushed out, overheats and doesn't get sucked back in.
  4. alldodge

    1999 bayliner vibration

    No Post a pic of the rear mounts Does the alignment bar go into the coupler at all, and if so how far? If it doesn't go in, where does it touch (top, bottom, side)? Can the fiber washer be moved?
  5. alldodge

    Ford 302 issues

    With the HX cap removed are there any bubbles? As in maybe a head gasket issue
  6. alldodge

    1999 bayliner vibration

    Need to stick with this thread instead of starting another. Your new thread is in the FAQ section and no one can reply. Stick with this thread Post a pic of your rear mounts If the rear mounts were replaced with new style then you might not use the spring washers. If not then are the spring...
  7. alldodge

    2002 Mercruiser 5 liter MPI cold start issue

    Thanks 555 ECM Place a voltmeter on pin D of the DLC connector. With Key turned ON there should be 12V. The 12V should stay there when cranking
  8. alldodge

    Boat going in reverse instead of forward

    As a non expert, I'm just going by what your telling me. Hey @Texasmark maybe so.e help. You say everything works as it should and you have a right handed prop on the motor
  9. alldodge

    Boat going in reverse instead of forward

    No expert, but that would be my guess. Have not heard of a Force Merc motor, but post your question in one of those sections and have a better chance of getting a more knowledgeable person Otherwise might just get a left had prop and go boating
  10. alldodge

    91 four winns 285 winterizing question

    Just looked the manual up and it shows a drain (item 7) in the manual. Its its not there look for a plug. I winterize my HW tank by draining and then connect a short piece of hose between the inlet and out put of tank. This way you need much less AF That said, I also don't use AF in my water...
  11. alldodge

    2002 Mercruiser 5 liter MPI cold start issue

    First guess is needs a new key switch, but lets investigate What is the motor serial number?
  12. alldodge

    Mercruiser 3.0 TKS problem at cold air temperatures

    Not marked in the manual but look like vent opening for float bowl and maybe venturi
  13. alldodge

    7.4 Mercruiser Distributor, Ignition, coil

    Without the module you don't have a working ignition. The link chris has list parts and how the TB ignition works. Search for Delco EST and it will show what it takes. All ignition except points or petronix or the like require a module
  14. alldodge

    Bravo 1 oil leak

    No, the oil hole has to be in the same place. You have new style so just look the the oil hole inside the large o ring on the water jacket
  15. alldodge

    how to change a prop on mercruiser alpha one outdrive 4.3L 2010 bayliner BR 195

    I would use a short piece of 2x4 between ventilation plate and prop to hold.
  16. alldodge

    Drive Lube Bottle Cap

    If you can make one, post it up.
  17. alldodge

    Second Happiest Day . . .

    CATs and get to show everyone you can dock easy peezy. Before, you could show them you can dock like a pro without the joystick :cool: (y)
Top