Search results

  1. Faztbullet

    1973 Mercury 850 Won’t Idle

    Reed blocks need replaced a labyrinth seal edges are hammered
  2. Faztbullet

    Wits end again - 75 V4 115. Will an oscilloscope help??

    Take a timing light and hook it to each org wire going to coils and see whch one/s are miss firing. You also need a DVA adapter as digital meter are to slow to catch a voltage flip. You should have seen the trigger voltage flip from + to-
  3. Faztbullet

    1979 5 HP Mariner question

    PLUG...NGK ...B7HS PLUG GAP.... .024 IDLE IN GEAR RPM +/- 50....1200RPM WOT RPM......4500-5500 POINT GAP......... .014 TIMING: MAX. BTDC STATIC CRANKING......057 +/- .016 TIMING: BTDC RUNNING 18° GEARCASE CAP. ........2.6 FL. OZ
  4. Faztbullet

    non-VRO fuel pump swap for Johnson 115 v4 Ocean Runner

    I have not had any of my customers that used that double stack pump with success
  5. Faztbullet

    Mercury 1998 150 V6 efi 2 stroke issue

    One side of stator could be dropping out.
  6. Faztbullet

    Mercury 150hp External to Internal Hydraulic Assy.

    Only if you change the midsection and clamp bracket assy.
  7. Faztbullet

    Yamaha 08 2 stroke 90TLR low compression

    Tis the gauge as all 3 are equal. Just start running Yammy Ringfree in your fuel every other tank.
  8. Faztbullet

    1997 to 2001 2 stroke mercury 90hp

    Everything will swap..to make lower unit work will need to use old shift rod and linkage
  9. Faztbullet

    Evinrude 25 Lean sneeze

    Crankcase leak or seal issue. Since it stops after using it , thermal expansion will seal crankcase.
  10. Faztbullet

    1986 gauges

    You need a 30 psi gauge as it will be 5-10psi at idle, and 18-22 at midrange with poppet cycling and 12-18 psi at 5K. A 15psi is for inline engines
  11. Faztbullet

    1986 gauges

    Any gauge whether OEM or aftermarket made for a outboard will work. All you need is tach,pressure and fuel
  12. Faztbullet

    Johnson 55 hp year i.d.

    WAG.....1987
  13. Faztbullet

    Fuse blows between CDI pack , replace fuse but now engine bogs and slowly picks up speed

    Disconnect the yellow wires at rectifier and retest
  14. Faztbullet

    Fuse blows between CDI pack , replace fuse but now engine bogs and slowly picks up speed

    CDI's are not fused, you mean the rectifier/regulator?
  15. Faztbullet

    Thunderbolt ignition wiring identification

    That a Force with Merc ADI ignition...and the wire is blue not green.
  16. Faztbullet

    Etec evinrude 150

    Aint but 3 ..if they havent changed design easy to take apart and clean
  17. Faztbullet

    2016 Mercury 115 2.1l earthing grounding shorting issue

    Post is confusing...what exactly is happening?
  18. Faztbullet

    Etec evinrude 150

    Different check/recirc system on Etec and carbed engine
Top