Search results

  1. Faztbullet

    Broken magnets

    Don't know if you removed broken magnets but they got to be in place to produce power for capacitor in switchbox.
  2. Faztbullet

    Looking for a prop gasket for 2004 Mercury 8hp

    A 2 stoke will do that no matter the oil used....Unplug the fuel line also if attached.
  3. Faztbullet

    Late 60s/early 70s StarCraft 16’ - Mariner OB shifting/idle problems

    Dump the autoblend unit so ya dont burn it up..
  4. Faztbullet

    Fuel leak under flywheel?

    Yes the top seals do blow out on V-6 motors and yes fuel/oil mix will blow out . I have replaced a many over the years.
  5. Faztbullet

    200EFI mercury

    Read post#1 again Sea..its before trimming and a V-6 will blow quicker than a lil 2 cylinder. Mr Russel since you added 50HP and gear ratio should be the same, you need to start with a 3 blade prop in the 23-26 pitch range.
  6. Faztbullet

    2013 E-Tec 250 (E250DPXABA/S# 5396595) Hard Start

    Sound like the CPS is not staying synced to flywheel or fuel pressure dropping
  7. Faztbullet

    V-4 Johnson 140 hp

    You cannot make a cylinder .020 with a hone unless you have a multi mega dollar Sunnen machine. You are wasting your time as hole won't be straight and to spec. It has to be bored. Seen several DIY motors that this was tried on and all failed as cylinder honed ended up tapered.
  8. Faztbullet

    hi, i have a 2004 140 hp merc.

    Debris in divider plate or blown head gasket
  9. Faztbullet

    Service mariner 1989 60hp outboard

    That block design has been used for years.....your year model does not use a t-stat or poppet. Clean up the plates and reinstall with new gaskets and get it wet.
  10. Faztbullet

    Service mariner 1989 60hp outboard

    No as that year is not designed for one...
  11. Faztbullet

    Service mariner 1989 60hp outboard

    You dont not want a t-stat, these engines have enough problem's with cooling.
  12. Faztbullet

    1989 Mariner, 115hp, four cyl., carb. 9 amp Mod# OC00000268 parts numbers question.

    Need a DVA adapter and test output not ohms. Yes an A23 would be compatible. A bad stator will not damage a trigger but a bad switchbox will
  13. Faztbullet

    No beep at ignition and engine won’t start

    Carb or EFI? Look for rectifier damaged and replace.
  14. Faztbullet

    Service mariner 1989 60hp outboard

    Depending on serial number most of those do not have t-stat or poppet, also get a factory manual.
  15. Faztbullet

    Durbans Johnsonator outboard motors .

    How are you going to cool exhaust tube and housing?
  16. Faztbullet

    Piston fit

    Bore size is 3.501 and piston 1/2" on skirt is 3.494 +/-.001. If bore measures 3.504 or larger it needs rebuilt
  17. Faztbullet

    Looking for help !

    How did you know VRO pump failed?
  18. Faztbullet

    Looking for help !

    Dont use your fingers to try and pull it off as the magnet force is great and can actually pinch the finger tips off...
Top