Search results

  1. S

    1989 Johnson TJ50TLCEC No Spark

    Got confused with another thread...you have one power pack so that could be your problem. Rule out the stator/charge coil/chaffed wires then pp is the issue assuming all connection have been gone through. (Corrosion) Salt water motor?
  2. S

    1989 Johnson TJ50TLCEC No Spark

    You made this statement..." my wire colors do look correct " max rules has color charts but you already must know. Continuity test on wires should come out with 0 resistance. Resistants for your stator coil will be listed online. All the ignition systems can be tested but the power pack. If...
  3. S

    1989 Johnson TJ50TLCEC No Spark

    Sounds like it could be a bad wire...time to do some continuity testing. Wire or stator is my guess.
  4. S

    Idles then dont

    Fuel issue, low idle circuit. Full speed that circuit is bypassed and run though the main jet. You most likely missed something cleaning the carbs.
  5. S

    Idles then dont

    Should be set higher than that if there's no load. Possibly could be your problem.
  6. S

    Idles then dont

    OEM parts? What rpm are you setting it to? In gear and under load?
  7. S

    1986 Evinrude 40hp - Manual trim - reverse/lock not engaging

    Pictures?
  8. S

    1977 Evinrude 6hp recoil starter assembly

    This is your assembly, which part number do you need?
  9. S

    Starter issue 1990 E'rude 8 hp.

    Didn't need to....the stopper broke at the flywheel. The parts your talking about are unnecessary for operation of the outboard, strictly a safety device
  10. S

    Starter issue 1990 E'rude 8 hp.

    I have a 1991 Evinrude 8 HP that I bought brand new and that broke twenty years ago. I like it because lots of times I back off beaches in windy weather and I can start it in reverse.
  11. S

    1988 Johnson 70hp inspection

    All great info, thank you.
  12. S

    1988 Johnson 70hp inspection

    Btw, I have the TH400!
  13. S

    1988 Johnson 70hp inspection

    Basically that's why I'd be doing it to, just to see if I can! Doing it in Seattle will mean that I'm going to lose money, oh well! 😆🤣😆
  14. S

    1988 Johnson 70hp inspection

    In my area, these are junk blocks!
  15. S

    1988 Johnson 70hp inspection

    Yeah, he said he thought they had to go into a freezer. Obviously they shrink and expand based apon temp. If anyone knows if that's true please speak up. Right now I have two 30 hp and a 70 jphnsons that have low compression in some of the cylinders...usually here in Seattle its off to the...
  16. S

    1988 Johnson 70hp inspection

    Ever bore with one?
  17. S

    1988 Johnson 70hp inspection

    Thanks buddy, once again you came through....on another note, do you like the new color scheme and a hell of a nice guy gave me a CMC T&T.... Works great!
  18. S

    1988 Johnson 70hp inspection

    Oops
  19. S

    1988 Johnson 70hp inspection

    Prop guy says block must be at a certain temp to bore correctly. Any details you have would be muchly appreciated. Matt
  20. S

    1988 Johnson 70hp inspection

    W Was your machine like this one?
Top