Search results

  1. nola mike

    Boat won't go over 3000 RPM no mater what prop I use

    I'll raise you one and say I've never had an injector issue. I'm not the sharpest tool in the drawer with marine systems, but have dealt with extensive auto systems since the '80's ...
  2. nola mike

    Boat won't go over 3000 RPM no mater what prop I use

    You should be checking everything mechanically with the engine (actually, should have done this prior to purchase). Yeah, also verify tach function. First thing I'd do is compression check (for sure), followed by checking/changing fuel filters/fuel, plugs, cap. Assuming the engine is running...
  3. nola mike

    Engine swap, OMC to mercruiser

    (unless you want vortec heads and more power). What keeps the 2 piece RMS from swapping over? Different crank bolt/flywheel pattern? At least some newer engines already have brass, my 2000 4.3 already did and others have reported the same. Agreed. Also, only success stories I've seen have...
  4. nola mike

    Starter Wiring, 4.3L Mercruiser

    I thought that was the case, but manual #7 has a section on a prestolite points system? Edit: NVM, that's for the 3.8l v6, which I've never seen in the wild
  5. nola mike

    Engine swap, OMC to mercruiser

    I got one on my boat. Same engine basically as what you have now. My feeling is a truck engine will be better than a used marine block.
  6. nola mike

    Engine swap, OMC to mercruiser

    Whole engine, all accessories, wiring, controls, outdrive, transom bits, everything. You'll need a donor boat with a rotten hull.
  7. nola mike

    Engine stalls when put in gearMy boat is a 1979 27 ft Carver Monterey Mercruiser 228 305 4barrel - Alpha Drive The engine stalls when shifting gear

    Unless you upgraded your running gear, you don't have an alpha--likely an MC-1 The SIS should only activate coming out of gear when on the water running. "A little stiff" is a bad cable. There should be practically no resistance
  8. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    I'd probably call the merc an open loop system, since the pcm is operating on a fixed maps based on some sensor input. It just doesn't ever go into closed loop. But yeah, he isn't ever switching into closed loop
  9. nola mike

    Starter Wiring, 4.3L Mercruiser

    Also might have a mechanical fuel pump
  10. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    Admittedly ignorant about the merc systems, so just throwing out my ill informed thoughts... IAC shouldn't have huge effect once your rpms are up. You can check the operation with a scan tool, number of counts. An open loop system kind of limits your ability to tell whether you're running...
  11. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    You've mentioned closed/open loop a few times...afaik your engine doesn't use a closed loop system... But are you no longer getting a code 14?
  12. nola mike

    Mercruiser alpha one gen 1

    Need a lot more info on what's going on, but no, the gear ratios on a v8 won't work on a 3l most likely. Maybe a 5.0 using a 1.62 would work on a 3.7, but in general the typical 1.47 wouldn't work with the typical 1.94ish on the 3.0l
  13. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    So you tested the wiring as well?
  14. nola mike

    Starter Wiring, 4.3L Mercruiser

    Ah well, I have a relay in my setup, so would work fine. Unless people are specific on what they're working on, every engine is mine 😁
  15. nola mike

    Starter Wiring, 4.3L Mercruiser

    Why not wire the fuel pump starting circuit off the yellow/red slave solenoid output lead?
  16. nola mike

    Engine swap, OMC to mercruiser

    Are you talking keeping the omc setup? If so, yes long block is easiest. Otherwise pulley to prop Merc is the way to go. Anything else and you'll be chasing stupid random parts.
  17. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    You had a code, doesn't seem like you did the troubleshooting for it.
  18. nola mike

    Boathouse Length vs Boat Length

    Can you back the boat in?
  19. nola mike

    Miss firing Merc 7.4 mpi L29 2000 2855 Ciera SB

    Looks like a pretty good flow chart. Bad ECT would cause it to run rich, not sure why it would only affect one side though. Does it miss only when warm?
  20. nola mike

    2.00 ratio Alpha one gen 2

    Different... Do you have twins? If so, one should be counter rotating, which is done in the gear housing. Any of the uppers will mate with the lowers, with potentially a small difference in overall drive ratio. Normally this isn't something you'd notice, but if you have twins, a small difference...
Top