Search results

  1. flashback

    1996 SeaRay 215 Express Cruiser electrical issue

    just start cleaning the connections, I have a 95 SR and I found the buss bar terminals for ground wires needed it badly..It's a good pastime when you feel like tinkering...
  2. flashback

    Will my oil pan gasket leak or should I re-do it?

    Looks like the flange on the pan is bent now. You cannot over lap a gasket and expect it to seal. Trim the cork to fit and use a sealant at the joint.
  3. flashback

    What depth is safe for a stern drive 16ft to 18ft boat?

    I don't know anything about them but maybe a jet drive would serve better.
  4. flashback

    Be easy on me please. Total newbie.

    Something similar happened to me year before last. My neighbor sold his house, gave me his searay and moved back to England. Now he wants to come visit me so he can use his old boat! LOL
  5. flashback

    Bow Stopp Guidance

    Ok, don't look too bad... you have several mounting points on the forward cross brace for the c channel brackets like you currently have on the back. Once they are installed you run a bunk board far enough forward to catch at least half the boat and carry the boat above the fenders a couple of...
  6. flashback

    Bow Stopp Guidance

    Build 3 saw horses, one for the motor and the other 2 to put the boat on so you can work on it and the trailer... Post a picture of the trailer alone..
  7. flashback

    I assume I need an engine alignment, vibration when drive is engaged

    All tools I've seen are quite long, around 30 in or so...
  8. flashback

    Bow Stopp Guidance

    I see what appears to be a partial bunk at the transom that should extend forward to support the hull. Take the boat off the trailer and you will see where the bunks should be.
  9. flashback

    Clear hose

    It was just an off the wall thought I had after seeing the topic come up. I appreciate the input and may give it a go..
  10. flashback

    Bow Stopp Guidance

    You need to get the boat off the frame and install some proper bunks first.
  11. flashback

    Clear hose

    Thanks for the tip. It could be a good help if I see the temp going up..
  12. flashback

    Clear hose

    Thanks for the reply! That's my thoughts as well but as I plan on replacing the hose soon I was curious if it could be done with some clear from the steering cooler to the thermostat and used as a early warning.
  13. flashback

    Clear hose

    I've often seen recommendations for a section of clear hose installed at the thermostat for the water intake to diagnose overheating. Can you leave it in the system permanently and if you can, what type or brand?
  14. flashback

    Bravo 3 Measurement Request

    Ok, I'm totally ignorant regarding the bravo 3, why do you block off the intake port?
  15. flashback

    Be easy on me please. Total newbie.

    Regular maintenance is crucial on these guys so you need to get the back story on it's life. Soak up as much as you can from the knowledge base here. You will probably find that even if the hull structure is okay there will be a bunch of stuff needing attention.. good luck!
  16. flashback

    Front wheel bearings and hubs

    The truck spent half it's life in ga and the other half in east tn so no rust problem, the hardest thing was finding a level place to jack it up and the over tight lugs.. next on the list will be shocks..
  17. flashback

    Head holding tank pump out

    I wouldn't use the shop vac directly, but I can see rigging up a 5 gal paint bucket as the primary collector.
  18. flashback

    Head holding tank pump out

    I've had porta pottys with more capacity than you claim. Might last the weekend. The shop vac is a good idea...
  19. flashback

    pontoon contamination

    Try some toilet bowl cleaner or a pressure washer. Looks like dried algae to me..
Top