Search results

  1. flashback

    Fuel use meter?

    Top off before they leave and charge for a second top off on return, what ever they use in between is on them...
  2. flashback

    I assume I need an engine alignment, vibration when drive is engaged

    I had one last thought, check the prop shaft. It may have been bent if drive was mistreated during engine swap.
  3. flashback

    Manifold/riser condition

    The manifold doesn't look too bad, how about the elbow? I changed mine last year they were bad.
  4. flashback

    Oil Drain plug

    If this engine is on the bench I highly recommend you repair it now.
  5. flashback

    First plane ride/snow !

    Beautiful!
  6. flashback

    First plane ride/snow !

    Congrats on the new grandbaby! So how do you like flying? I haven't done it much but the acceleration on takeoff is a rush..
  7. flashback

    I assume I need an engine alignment, vibration when drive is engaged

    Check the motor mounts they may have not been tightened up at install..
  8. flashback

    Sears Ted Williams 7.5 HP carb?

    Imo that's a friction washer to prevent the screw from adjusting itself, it may still be in the carb..
  9. flashback

    Chain locker bulkhead re fitting advise please (with pictures )

    You could also glass a couple of ribs to the hull and then just screw the bulkhead to them which would allow you to remove it in the future.. It never was designed to be structural but just a partition.
  10. flashback

    Which States/Provinces Enforce Registration Numbers Requirements

    I'm inland and seldom even see any Leo except on the 4th and he ain't looking for reg numbers..
  11. flashback

    Shop Tach

    That's all I got to offer maybe it's faulty.
  12. flashback

    Sharrow prop

    I remember hearing about a 300mpg carb.. LOL
  13. flashback

    Shop Tach

    You probably are missing a setting, take a look at the instructions.
  14. flashback

    Front wheel bearings and hubs

    I don't know anything about the newer tranny's or anything else for that matter, still in the dark ages. I do know the tranny in my truck is doing fine for the moment although the engine has had a piston slap but it quiets down after a few minutes. The AC crapped out a few years ago but the...
  15. flashback

    Front wheel bearings and hubs

    I like this truck, have nightmares of owning a newer one for all the computer gadgets.
  16. flashback

    Front wheel bearings and hubs

    Yep that's what I have and the reason I was looking for an afoerable brand that will last for a few more years..this old truck has been good to me but I don't expect too much more from it.
  17. flashback

    Front wheel bearings and hubs

    That 2500 must be a different setup my 1500 appears to be a single unit and sealed. In the olden days you could get roller bearings like on a trailer and races if needed.
  18. flashback

    Front wheel bearings and hubs

    Ok, I can do that, where should I send the beers..? Thanks.
  19. flashback

    Front wheel bearings and hubs

    I have a 2001 GMC Sierra RWD and the front bearings have been hollering for a few years and need replacement. Doesn't look difficult but deciding what to buy is.. what are your thoughts on the TRQ brand. This old truck has 200,000 miles on it and I can get the said brand almost anywhere..
  20. flashback

    Inherited a custom made wooden replica 1950's runabout WITHOUT an engine

    When it's all said and done you have a homemade replica with no motor or tranny that needs work. I think you'd be fortunate to get 5,000
Top