Search results

  1. R

    help identifying small outboard

    Looks like a 2 stroke 4.5 HP Evinrude to me.-----From 1980 / 81 / 82 / 83 model year.----Uses same impeller as Johnson / Evinrude 4.5 / 7.5 / 6 / 8 HP from 1980 to 2005 ----Parts are easy to find.
  2. R

    Mercury merc 110 9.8hp motor

    Trouble shooting starts with a compression test.----Post your numbers.-----It will need a new impeller before your first fishing trip.
  3. R

    Mercury merc 110 9.8hp motor

    Agreed----You can argue all day long.----But 76 and 77 were the only years for that style decal !
  4. R

    HELP! Evinrude 115 v4 overheating in only starboard side of engine

    It looks to me thar there are 2 head gaskets installed on the starboard side.
  5. R

    Johnson 25hp motor bogs down

    Carburetor should be empty when you launch the boat.----Operating the manual pump ( bulb ) should tell you if it is working properly.---Pumping fuel.-----It must go hard ( 4 or 5 squeezes ) and that tells you that carburetor is full and that there are no leaks.
  6. R

    Johnson 25hp motor bogs down

    In reverse there are exhaust bubbles in the water.----Therefor less work for the prop.
  7. R

    1998 Evinrude ocean pro 200

    Engine wiring harness is not to be used to provide 12 volts for engine only.
  8. R

    Wading prius

    Just saw one EV company has initiated bankruptcy proceedings.----Glad I did not give them a deposit for one of their products.----Or worse , have one in my driveway !
  9. R

    1984 Johnson 70hp 2 stroke

    ??----I see numbers that high on good motors with a good gauge.----Not all control boxed have a horn with a self check ( beep ) feature.
  10. R

    HELP! Evinrude 115 v4 overheating in only starboard side of engine

    You are sure there is only 1 head gasket there ??
  11. R

    1998 Evinrude ocean pro 200

    It supplies 12 volts to the key.----That 12 volts is used to activate starter solenoid.----Activate primer solenoid valve.----And any instrument relating to the motor.
  12. R

    Wading prius

    Just love the way folks do thing today.------Money seems to be in plentiful supply.-----Common sense not so much.
  13. R

    1984 Johnson 70hp 2 stroke

    Did you install a new water pump impeller when you bought this boat ?----Did you test the overheat horn ?------The compression on 2 cylinders is MUCH lower.-----Just 22 bolts to take the head off.----That will tell the story.----Nothing else needs to be done at this time.----Take the head off.
  14. R

    1998 Evinrude ocean pro 200

    Correct ----For many years they used a 5/8" long 20 amp fuse.
  15. R

    Evinrude 25 Electric Conversion

    They have used that " bank of wires " for many years.-----Why would a novice say that it" doesn't look too reliable " ?????
  16. R

    HELP! Evinrude 115 v4 overheating in only starboard side of engine

    Head gaskets installed correctly ?----Picture showing the tabs on top of the heads ?
  17. R

    9.5 coils.

    Sounds like motor did not get used for many years ( cracked coils ) and you would be wise to install a new water pump impeller.
  18. R

    Evinrude 60hp - 3 Blade vs 4 Blade Prop Pitch

    If 4400 RPM is maximum with 17" pitch , there is something wrong with the motor.----Find a shop with a dynamometer or test prop and have power output checked !!
Top