Search results

  1. R

    Lost power on return to ramp screws missing from transfer port caps. 94 force 120

    One gasket.-----Do you understand that your motor is a 2 stage air processing machine ?-----Air / fuel is pulled into the crankcase when piston goes towards sparkplug.------That air is compressed in the crankcase when piston moves away from sparkplug.-----That fresh air / fuel rushes into the...
  2. R

    1996 Evinrude V6 150 (60 deg) Looper Problems

    Reed valves have nothing to do with compression in the cylinder !-----Pushing in the key opens the fuel primer valve.---Pushing in the key does NOT activate " quickstart." ------Quick start advances ignition when engine is cold.
  3. R

    Lost power on return to ramp screws missing from transfer port caps. 94 force 120

    Problem is now solved.
  4. R

    1989 9,9hp Mariner 2stroke starting Issues.

    Running on 50:1 fuel mix ?----Yes check the flywheel key.
  5. R

    Lost power on return to ramp screws missing from transfer port caps. 94 force 120

    You could make a gasket.----Take one of the bolts ( 1/4-20NC ) to a hardware store and get some new ones.
  6. R

    25hp problem

    Test compression.-----See if spark jumps a gap of 3/8" on both leads.-----You must install a new water pump impeller.
  7. R

    25hp problem

    Running on just 1 cylinder ?
  8. R

    1973 johnson 25hp 25R73A

    Do not use any RTV type sealer anywhere on that motor.----Use BRP gelseal on crankcase to block ---metal to metal ----joint.
  9. R

    1957 Johnson 18 hp. FDE-11

    Agreed with above.-----Sounds like not enough pressure in the tank.-----Cap on tank has to be closed.
  10. R

    Two different motors same issue

    ??----Carburetors cool down and moisture condenses in them.
  11. R

    1979 35hp Johnson - smallest battery?

    Garden tractor battery will do the trick.-----Motor in good condition will start in just seconds.
  12. R

    Two different motors same issue

    ???----We have all heard of carburetor icing have we not ?-----When a liquid vaporizes it seeks / needs heat.----Refrigeration principle from long ago.-----So the carburetor cools down and moisture from the air condenses in the carburetor.-----Shows as a white milky fluid !!
  13. R

    Fiberglass storage .... Shelf life ?

    has to be dried.
  14. R

    lubricate impeller with what? Volvo 3L

    Used for ease of assembly only.----Water is the lubricant for impellers.
  15. R

    Fiberglass storage .... Shelf life ?

    Water in it would be the only issue.----Oil spilled would be a huge issue.------Make sure it was stored dry and use it.-----Age of the glass is not an issue.
  16. R

    1984 Sea King Chrysler

    On a 2 stroke ( even in good condition ) some gas and oil goes right through the motor.----It is wasted and that is what collects in the exhaust housing.
  17. R

    1996 Evinrude V6 150 (60 deg) Looper Problems

    I used to have a 16' running at 54 MPH and this Action Marine 17 will not be a problem.
  18. R

    1996 Evinrude V6 150 (60 deg) Looper Problems

    It is an---Action Marine 17 with a 25" transom.-----Look it up on you tube.-------Rated for 150 HP and some running with 200 HP.-----Yes it is a small " go fast " boat.
  19. R

    1996 Evinrude V6 150 (60 deg) Looper Problems

    Yes on a motor in good condition there is clearance between cam and roller.----If throttle opens too soon , motor will stall.----They call it " throttle pick up timing " for a reason.----This concept has baffled folks for ages !!
  20. R

    1996 Evinrude V6 150 (60 deg) Looper Problems

    Not normal for a V-4 like that to run rough !
Top