Search results

  1. R

    Can't get the remote control open

    A Javelin from the late 1980's ??----Model # is ?-----Those screws would have a 1/4-20NC thread.----They are not metric.
  2. R

    Engine Identification?

    Perhaps leave it where it is for the wee critters to build a home again.-----Looks like they were in there already.
  3. R

    Running problems

    Does spark jump a gap of 7/16" on all leads on a test device ?---Compression test results are recent ?---Are you pushing the key in while cranking for the cold starting ?----- -I can not see, hear or feel your motor.-----You must do inspection / testing and report.
  4. R

    Any way to tell year and model number with serial number?

    The 1993 models and newer had a top mounted recoil.----Post more pictures of your motor !!
  5. R

    Where does this spring go???

    It does NOT anchor anywhere.
  6. R

    1970 evinrude lark 40

    They were very good ( in my opinion ) and reliable.---Friends had a 1966 Johnson 100 HP and never had issues with electric shift on it.-----Used it a lot.-----Some weekends that motor hardly had time to cool down between fishing , waterskiing and sight seeing.----Perhaps production costs entered...
  7. R

    Outboard stalls when put into forward after reverse first

    A 2 stroke at idle will slow down slightly when put into gear.---Simply because prop now has to move water.-----If motor slows a lot or stalls then there are issues that need to be resolved.---Trouble shooting can find those issues.
  8. R

    Running problems

    How did it run for you last season ?----The orange wires from switch box ( powerpack ) going to the top coils are what color ?----Correct prop fitted to suit the boat ?
  9. R

    Can't get the remote control open

    The 2 screws remove box from the boat.----Then 3 screws to take box apart.-----Yes drill the heads off if you have to.
  10. R

    1997 Evinrude SPL90 2 Stroke V4 dripping oil/gas down front of shaft from case

    I would say the gasket under the powerhead is leaking.----Remove cowling .----Start motor on a hose and let it idle for 5 to 10 minutes.-----Observe.
  11. R

    How do I adjust the fuel/air blend ???

    Model # is ???----Agreed with the above.----Most modern carburetors have fixed metering jets.----Set at the factory.-----The maximum timing is fixed and set at the factory.----No need for a novice to try adjusting anything.-----Rather post what your motor is doing / not doing to see what might...
  12. R

    Where does this spring go???

    This spring holds the CHOKE flappers OPEN at full throttle.------Keeps them from fluttering.
  13. R

    Engine Identification?

    Agreed----It should be free !!----Take the other lower unit too.----After looking again , I think it is a 1976 based on paint color and motor linkages.----It is a long shaft based on steering hook up.
  14. R

    Engine Identification?

    That would be a 1973 to 1976 model 65 or 70 HP.------More good product getting dragged out for eager buyers.----Looks like a $200 motor to me.
  15. R

    Mercury Classic 50 serial number not found at Mercury website

    Times have changed.---Fifty years ago ( BC ) folks supported and trusted the local dealer.---You had to call or visit.------Today folks appear to demand instant help without any effort or expense.-------OH---( BC ) = before computers.
  16. R

    Mercury Classic 50 serial number not found at Mercury website

    ??----Are you looking for your information for a 50 HP motor or for the 45 HP rating of this motor that is called a " classic 50 "
  17. R

    1970 evinrude lark 40

    Agreed------Electric shift on outboards is wonderful.-----Just not understood by many.----I hope you trust the 8 speed electronic controlled transmission in your modern vehicle.
  18. R

    1990 150 HP V6 Leak Down Fail. Help!

    Some will argue.----I see scoring in one of the cylinders.----Not a good sign.
  19. R

    2017 Evinrude

    Read and understand what you have.----Mistakes are easy to make and will be expensive.
  20. R

    Question: 1957 18hp Johnson

    I do not believe you understand tolerances on a 1957 Johnson outboard.----Perhaps you are mis-informed.
Top