Search results

  1. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    I've got the manual, I know the timing specs...I just can't seem to check it.
  2. nola mike

    Still having shift issues and need / like some input

    So if unable to adjust properly it means you have slop in the system somewhere. Did you check all of the tolerances as in the video?
  3. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    Well, timing at idle is 6', so it should be 6' until it starts to advance I'd think. I do want to verify WOT timing though, since I think the screw has been messed with before.
  4. nola mike

    Merc 4.3 v6 distributor cap and cilinder connections

    Looking at your original setup...you've got the cylinders numbered wrong, but connected correctly. So your #5 on the dizzy is actually the #1 cylinder, #4 is #6 cylinder, etc. This will run fine unless you try to time it using your labeled #1 plug wire, which is actually the #3 cylinder. You'd...
  5. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    Yeah I have marks on the flywheel, no reason to think there's a sheared key. I was thinking of a points ignition where I could tell the position of the flywheel when the spark fires (when the points break). Obviously can't do that on cdi. Well, that's what I've been trying to do with the engine...
  6. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    Very helpful. I was thinking static timing by rotating to tdc and seeing where the mark was (but this is better since you don't have to accurately find tdc) . How come it doesn't work right with the engine running?
  7. nola mike

    Diagram for coolant system?

    Are the tstat housings different for fwc/rwc engines? Short of having a HX or a circulator pump in your box o parts it might be tough to tell the difference. Plus it could be a half or full system... Don't know what merc offered then.
  8. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    Thanks. Not sure why the advance wouldn't work (might be off with 1 spark/rotation instead of every other?). So yeah, seemed like the number of sparks kind of ran into each other, the light was constantly firing almost when the engine was idling, and much worse at higher speeds. So the timing...
  9. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    The mark stayed at 8' or something on the flywheel, and didn't move w engine revs or by advancing the light. Very odd.
  10. nola mike

    2003 25 hp merc 2 stroke impeller replacement

    I'm not able to find that in there That's what I'd think. However the timing mark remained static no matter what I did with the advance on the light (2 different lights). Bought a new one that's supposed to work with a2 stroke, but I can't see how it would be different. Going to have another...
  11. nola mike

    Alpha one gen II growling noise when turning

    Unless you have a tight fit in the coupler and the bar is perfectly true, this test doesn't mean much imo. Checking the runout using an alignment tool or maybe a driveshaft would be better, although I can see a couple of issues that way as well. Best method is probably get alignment right...
  12. nola mike

    Running boat on land with no prop?

    Well, if op has been running in a trough for 50 minutes, his impeller should be cooked and overheating by now, right?
  13. nola mike

    Alpha One II grinds in reverse

    edit: missed a few replies
  14. nola mike

    4.3L Mercruiser Milkshake

    Yeah, I meant in a Merc application. I'm sure we can agree that the 470 was special.
  15. nola mike

    4.3L Mercruiser Milkshake

    Did Ford make an inline?
  16. nola mike

    Water in the bilge

    Taking the drive off is regular maintenance, should be done yearly.
  17. nola mike

    Custom "Princess" Bow Cushion

    I tried about 6 shops and none would touch them without an old seat to go off of. Ended up making some of mine, finding someone on nextdoor to do a couple and buying a few premade. I used veada for the premade and the materials (so I knew it would match), but it doesn't look like they sell...
  18. nola mike

    4.3L Mercruiser Milkshake

    Yoke length was different on the inline mc-1s and earlier iirc. 84 should be an alpha and the vee engines were always the same. Either way the yoke can be swapped easily. @Bondo can confirm
  19. nola mike

    Hole shot, or up easy?

    idle you are at displacement speed. burning very little fuel Jeez Scott, if you want to save gas, buy a rowboat 😄
  20. nola mike

    4.3L Mercruiser Milkshake

    Is that just rusted through?
Top