Search results

  1. jerryjerry05

    Thanks to Jerry Jerry for all of his advice. Merry Christmas

    Doing all those rebuilds??? Where you getting the parts?
  2. jerryjerry05

    Thanks to Jerry Jerry for all of his advice. Merry Christmas

    Your right, Nordin has been a great asset!!
  3. jerryjerry05

    1995 90HP Force Outboard Fuel Starvation

    If this is the Mercury ignition system?? Then the "trigger magnets" I don't think are used??? Turn the flywheel over and take a picture. When FrankA (RIP))made this post it was for the pre Mercury setup.
  4. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    No, not unless it's cracked.
  5. jerryjerry05

    Yamaha outboard value.

    SOLD!!! Put it on Facebook Marketplace. Within 3 minutes I had calls. First guy said he'd like to come by and look at it. The second guy said "I'm on the way" Within 2 hrs.GONE 1200$
  6. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    I can't find a good parts diagram that shows these parts in detail. If there is a o-ring or seal it might still be in the unit?? In post #3 of the Force forum, there is a post with FAQ about the T@T repairs. The post contains pics of the internal parts and how they line up. They're not your...
  7. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    If it's not leaking?? the seals are ok. The Hyd. pump itself, don't take it apart. They can be real hard putting it back together. The o-rings come in a kit, but you'll need the model # from the tag on the pump The repair I suggested: take the o-rings off and turn them around.
  8. jerryjerry05

    Thanks to Jerry Jerry for all of his advice. Merry Christmas

    Racerone and Jiggs and Don deserve to be on the list too. Lots more, just don't remember right now. I hit 70 this year and the memory is shot. I can remember the words to a song from the 60's but can't remember what I ate for breakfast :)
  9. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    99% of the problems with these units is LUBRICATION or lack of lube. The seal on the ram dries out and seizes and locks the ram or the seal pops out and leaks. I use White Lithium or even motor oil or marine grease. Lube it often.
  10. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    95 is all Mercury T@T On the other side of the housing 180d from the pressure relief is a cover, under that is a spool and sleeve. and a spring with check valve. The assembly needs to be cleaned. Use soap and water and then lube with WD-40 when you reassemble. Some cleaner/chemicals can swell...
  11. jerryjerry05

    Yamaha outboard value.

    It's a 2004 15 hp 2stroke. Very little use, been setting for the last 12 years that I know of. I got it running about 5-6 years ago and the owner put it right back in the shed after his son used it for a weekend. I know the amount of time means nothing but the looks do, The cover is...
  12. jerryjerry05

    Force 120 hp trouble whith tilt/trim

    Need the year and model and a picture of the T@T
  13. jerryjerry05

    Thanks to Jerry Jerry for all of his advice. Merry Christmas

    This was unexpected but THANKS!! This is how I get myself going in the morning, cup of coffee and the iBOATS forums. Everyone, have a safe and prosperous New Year!! Guess it's time to share the accolades: Remembering: FrankA, RRitt, Tashasdaddy, and many more that have passed on to the big...
  14. jerryjerry05

    Force 75 threw a magnet at us

    1/2 turn. Probably not right??? Procedure for setting the air screw. Set at 1 1/2 turn out. In the water, in gear turn the screw in 1/8th a turn. Wait 10 seconds, then turn again 1/8th and wait 10 seconds. Repeat this until the motor bucks, kicks, stutters etc. Then turn out 1/2 turn. This...
  15. jerryjerry05

    Force 75 threw a magnet at us

    The 3cyl. Forces: none really idle what you'd call smooth. The air/ fuel mix screw controls the operation up till about 2k, where's the screw set at now? They suggest 1 -1 1/2 out from lightly seated but that might not apply to your motor??? One customers motor needed to be set at 3 full...
  16. jerryjerry05

    60 DEGREE vapor seperator function?

    According to the invention, a fuel supply system for a marine engine comprises a vapor separator for receiving liquid fuel from a fuel tank and collecting vapors given off from the fuel, a high pressure pump having a fuel inlet for withdrawing liquid fuel from the vapor separator and a fuel...
  17. jerryjerry05

    Intermittent "cough" during startup.

    Slow turning, would cause hard starting not a cough.
  18. jerryjerry05

    1995 90HP Force Outboard Fuel Starvation

    First, check the primer for power after startup. Sometimes the key switch keeps the primer feeding the carb and if so it won't get to full rpms and can even stall the motor. Backfire: even 1 tiny backfire can blow the gaskets on the port covers(3) this makes the motor suck air. Do a starting...
  19. jerryjerry05

    1992 Bayliner 1700BR with 70 HP Force ?

    That's a Mercury lower unit. The prop, if it's still OEM should have a part # under the nut and washer. DM 21824 propeller , that # shows it's probably an aftermarket, maybe a Michigan prop, maybe a Solas?? Somewhere between a 10p-14p I use a puller with 3 chains adapted to the head. It needs a...
  20. jerryjerry05

    Intermittent "cough" during startup.

    The cough: could be the primer is feeding too much fuel, the air screw not set quite right, water in the fuel(small amount) the starting procedure and probably a million other reasons?? MERRY CHRISTMAS!!
Top