Search results

  1. alldodge

    Mercury 3.0 EST no spark

    The way it keeps running its bad gas and/or compression What were your compression numbers?
  2. alldodge

    Intake manifold gasket replacement advice and tips

    It will work sort of. The issue is it doesn't extend across the entire area
  3. alldodge

    Reading Codes on a VolvoPenta 5.7GiC-300-J?

    That's a QBhoy question
  4. alldodge

    Intake manifold gasket replacement advice and tips

    Metal Carpenters square will work
  5. alldodge

    Intake manifold gasket replacement advice and tips

    Your mixing If intake is leaking then we're talking about this thread and the head and intake must be flat If your talking about valve covers in the other thread then its of no concern of this thread
  6. alldodge

    Intake manifold gasket replacement advice and tips

    See if things a flat within 0.003 inch
  7. alldodge

    Reading Codes on a VolvoPenta 5.7GiC-300-J?

    Yes, because it has 2 connectors (I have already looked your motor up) https://www.hardin-marine.com/p-81018-ecmpcm-555-custom-calibration.aspx
  8. alldodge

    Wood rot HELP

    Have not removed a shower but have removed wood rot till there was no rot and rebuilt. This looks pretty extensive, so unless you really love the boat you might want to think of options With boats and rot, its always start ripping it out until you reach good wood
  9. alldodge

    Intake manifold gasket replacement advice and tips

    Manual 25 - Yes Torque is 11 Ft lB or 130 in lB Pay no attention to the guy in the Vid Use Black RTV bead along the flat, and put a ball of it in the corners where the head and intake meet, only Do NOT smear it around the water ports, just make sure both head and intake a clean and dry. You...
  10. alldodge

    08 Mustang Advice

    Never seen a motor which doesn't have a simple system to align timing marks. Double over head cam, they still use timing marks. If there is bent valves, then valve job and put back together That said, if ya don't want to do it, then go with the warranty
  11. alldodge

    Mercrusier 350 MAG MPI - RPM issue under a load

    Have not heard that but would not not say its not the case. The issue is while Bosch makes good stuff, they may not have been designed for your motor. The expert is Smitty and read through this thread to get a good feeling of what may be happening...
  12. alldodge

    Volvo Penta AQAD31 injection pump

    Unless your seeing Black smoke rolling, I would still think its the injection pump. A diesel is very efficient so it produces power based on how much fuel and air it gets. If it gets more fuel then it can burn it blows black smoke. If your not getting black smoke, then your not getting enough...
  13. alldodge

    Reading Codes on a VolvoPenta 5.7GiC-300-J?

    The 555 deals with which ECM (computer) is installed Old MEFI 1, 2, 3, 4 Newer 555 PCM 09 PCM 112 current
  14. alldodge

    Mercrusier 350 MAG MPI - RPM issue under a load

    Oh you mentioned China injectors, do you have China injectors in it now
  15. alldodge

    Mercrusier 350 MAG MPI - RPM issue under a load

    There is a real good thread right up on bosh injectors. They pertained to 525 type but worth the read. The guy that wrote it oil who I would send you to. He goes by articfriends on offshore only. In short, the Bosch injectors are not the same as Merc and given the same pulse timing put out more...
  16. alldodge

    Reading Codes on a VolvoPenta 5.7GiC-300-J?

    Because you asked Easy connect will give you motor info but not necessarily codes, nor can it clear them Hey @QBhoy you can fill in further
  17. alldodge

    Mercrusier 350 MAG MPI - RPM issue under a load

    Kianoushaa please start your own thread, we will help
  18. alldodge

    08 Mustang Advice

    I'm reading the 4.0 SOHC is not a interference engine, so replace the timing belt and drive on
  19. alldodge

    Mercrusier 350 MAG MPI - RPM issue under a load

    If memory serves yours is a 4B in front and 3B in rear (4x3 Merc XR series). If so your slightly larger then a 18-3x3 standard prop. If its a 4x4 then you could go to 18-3x3 In short you have the smallest pitch props made for the B3 so there is no where to go If its not the ratio, I'm out of...
  20. alldodge

    7.4 mpi mericruiser cranks over but wont start.

    There is no way any of us can figure out what's wrong without someone actually testing and providing accurate info. Statements like "sluggish, bent prop, fixed prop, " is not working Bent prop back into position, how was that done and balanced so it wouldn't effect the dive from vibration...
Top