Search results

  1. alldodge

    5.0 mpi backfiring through exhaust. Won’t start

    The cap should have the ports numbered, and left bank on left (1-3-5-7)and right on right (2-4-6-8). Makes it easier then the round ones Key ON pump should run for 2 seconds. Use a rag and push in on the schrader valve on fuel rail and see if fuel squirts out. If no gas, turn key ON/OFF a...
  2. alldodge

    5.0 mpi backfiring through exhaust. Won’t start

    No they are different. Boost pump is a low pressure pump at the fuel filter, and high pressure is under the motor port side
  3. alldodge

    5.0 mpi backfiring through exhaust. Won’t start

    Woops ok you have the additional boost pump
  4. alldodge

    Analog to Digital

    Being a 1990 I don't think the motor would be compatible unless its been replaced with a newer model. But if there is @dingbat might know
  5. alldodge

    5.0 mpi backfiring through exhaust. Won’t start

    My guess is the PO knows something he's not saying, and the Bravo does rotate in either direction What's your serial number?
  6. alldodge

    2014 3.0 mpi want go over 2500 rpm’s we have Cleaned all injectors replaced distributor and idles fine just will not go over 2500 like it’s on a rev.

    yes Disconnect the in-gear switch and see if it stops
  7. alldodge

    FLYWHEEL HELP!!!

    Looked up both I/O and IB 5.7 for 1996. There are different flywheels, and they both weight 33 LBs. The bell housing does show the IB starter comes in from the rear, all parts can be obtained today If you look at the side views of the 2 it sure looks to me like the ring gear is just on the...
  8. alldodge

    FLYWHEEL HELP!!!

    You built a 1996 motor and I know the 96 flywheel doesn't use a groove
  9. alldodge

    FLYWHEEL HELP!!!

    You sure about that? All other rings are installed by getting the flywheel cold and the ring hot. They don't move after that, easy peezy Hey @Bondo or @Scott Danforth
  10. alldodge

    FLYWHEEL HELP!!!

    Why not remove and Replace the ring gear
  11. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    Everything is easy for those that have done it a few times and have the necessary tools. A first timer needs to read up on what is needed to do the task. Pull the drive first and find out what is needed then we can provide more thoughts. To pull, move throttle handle full forward gear...
  12. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    It isn't done anymore but back in the day Searay did it for the looks. It is a Merc Alpha 1 drive that has been painted with decals. There is a guy here with a real nice 21 ft Pachanga
  13. alldodge

    Solar Power Installation . . .

    Not to sure a dc/dc would work. Takes power to run and just how much is not specified. How much of the 100 watt (on a sunny day max) would be used to produce enough to charge the others. Understand its being powered from the single Bat that is being charged by solar panel, but anything above...
  14. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    If its leaking from above then its coming from then most likely its coming from the drive shaft bellows. The above area is where the exhaust exits. The shift shaft goes up where the shift cable and drive shaft come together. If the bellows has oil in it then the upper drive shaft seal is...
  15. alldodge

    Solar Power Installation . . .

    The panel looks a bit larger for the Arch. Might think about another location, Maybe on the morning cover
  16. alldodge

    Mystery Engine Alarm

    I think the lights behind the Tach is just where they are positioned, doesn't mean anything. Would sure like to know what the code was the Mech read on the scanner. The impeller missing a blade was in need of replacement but getting the same alarm, it needs to be investigated further. Most...
  17. alldodge

    Mystery Engine Alarm

    Where do you see the numbers blinking? What motor 300-ca isn't enough serial numbers are best
  18. alldodge

    Intake warning sound for one second

    I'll assume its a Merc because its posted in the Merc section. Doesn't matter what the boat is but do need to know what motor and serial numbers are best? What is a intake warning sound? Maybe the alarm beeping?
  19. alldodge

    2002 5.0GL-B 305 Distributor

    It all deals with width of rotor and dizzy cap electrode width. While the 10 inch diameter damper outside circumference moves maybe an inch in one revolution to get 10* of advance. The rotor being half the diameter and moving 1/2 the distance (2 revs of the crank for one dizzy) needs to move...
  20. alldodge

    2002 5.0GL-B 305 Distributor

    Module and coil under rotor
Top