Search results

  1. alldodge

    Cannot kill boat

    Agree need SN If its a TKS carb might be the diode
  2. alldodge

    8.1 guardian mode at low rpm

    Thanks for the SN Things that cause guardian other then the ones already mentioned Battery voltage Engine oil pressure (not the gauge, same as temp has ECM sensor) CAN circuit fault Having a V drive so may also be the transmission overheat
  3. alldodge

    Mercruiser 3.0 No Spark issues

    Agree with Scott try both Had one on 2 different boats. Both the very ridge stingray model. The foil will use some hp due to increased drag. Having a 454 was no issue. On a 3L with no extra it will make things worse
  4. alldodge

    Trailer

    The axle may be bent so its not tracking true What do you mean "moving it back"?
  5. alldodge

    Lower until help

    Hey @Scott Danforth
  6. alldodge

    Mercruiser 3.0 No Spark issues

    I don't see drilling is needed because the transom is soft. Being able to tighten the bolts is showing that to be. With no more water being pumped and its not coming from the drive shaft, use the boat this season. Then replace the transom in the fall
  7. alldodge

    Maybe my turn for new boat time

    Looked at a few 310BR w/OB Looks like the 310 OB started in 2019, good part is there are a few out there, the bad is they are 34FT long. Looking real close at one in Marco Island, but hen figured its 34FT so don't really want to go that long Looking at 310 with I/O and a few with 6.2 and one...
  8. alldodge

    Quit My Job . . .

    Forgot "Mobile" :rolleyes: I hope
  9. alldodge

    3L rough idle, one black spark plug

    Always start a motor problem with a motor serial number One black plug could be low compression. Valve not closing correctly or rings broke. Do a compression test to find out
  10. alldodge

    Quit My Job . . .

    Great deal, move closer please :cool:
  11. alldodge

    Massive rockslide at Lake Powell caught on camera…

    Just watched it on the local news Glad no one was hurt
  12. alldodge

    Trim Clicks and Makes noise, but won't go up or down

    Just raise it full up and down a few times, its self bleeding Watch that it doesn't go dry
  13. alldodge

    Temperature Gremlin

    If it has a bad ground, it could be heating up and contact improves That said, most gauges use senders 180 (cold) to 33 (hot) ohms. The gauge is pegging so the gauge wire might be grounding out. If you have European gauges they work in reverse (cold low and hot is high resistance) The gauge...
  14. alldodge

    Temperature Gremlin

    Might be a bad ground
  15. alldodge

    1995 Chaperral 1930ss Drain plug?

    Never seen any fiberglass boat with on of those, looks like the ones used on watercraft like my Seadoo, Yamaha From the looks of the sealant around it, I'm thinking someone replaced it with that type. If the one Yag doesn't work, look at a local watercraft dealer
  16. alldodge

    8.1 guardian mode at low rpm

    What's your serial number? You changed the ECT and not the gauge sensor, correct?
  17. alldodge

    4.3 mercruiser knocking

    Your vid didn't make the trip
  18. alldodge

    Happiest Day of Ownership !!!

    I bought a set of yardarm jacks. Will lift 40K boat and real heavy them selves http://www.yardarm.com/marine_products/boat_handling_jacks.htm
  19. alldodge

    Fuel economy of a 2000 Cobalt 226 454 mag mpi with bravo lll

    Agree, my 23.5Footer got about the same with 454 and B1 drive
  20. alldodge

    Maiden voyage rebuilt engine

    Your first comment gave me the impression it didn't stop and kept going until it was re-torqued. If that isn't the case then take the other guys thoughts
Top