Search results

  1. R

    1995 Evinrude E40ELEO RPMs

    It is always best to deal with your local shop !
  2. R

    Resto info 1976 Fiberform bowrider Johnson 85 power tilt

    Boat in " great shape " I doubt it.----I suspect issues with the transom ( plywood core ) and perhaps the rust stains from motor mounting bolts are a clue.-----Most folks would use stainless there.----And install a new water pump impeller before launching this boat.
  3. R

    1976 9.9hp thermostat seal orientation

    Second picture is correct.
  4. R

    1l971 Johnson 4hp

    Replace both coils.-----And you need to position the coils for correct clearance with flywheel.-----There is a special tool to save time.----But hurry to ----leroysramblings-----Great tutorial on how to work on this simple magneto.
  5. R

    83 evinrude 90hp need replacement coils..

    Next is to run with a timing light ( one cylinder at a time ) and see if you can find a cylinder with a miss.
  6. R

    83 evinrude 90hp need replacement coils..

    Do a compression test first before spending any beer tokens on coils.----Post the numbers here.
  7. R

    1958 Evinrude 18hp piston part number cross reference

    The 1966 pistons at 0.040" should work.------But look for a donor 18 HP block assembly.----Many low hr ones out there.------Place a free wanted ad on -----aomci-----website.------Save you a lot of beer tokens. ----Your location ?
  8. R

    Drain Plug Stuck

    Go to a shop.----Marine / machine shop.----Have them remove / cut out the drain plug.----Clean up threads and install new plugs.
  9. R

    83 evinrude 90hp need replacement coils..

    Strange that you would need 4 coils.----But the only difference is the orange wire and how it is attached.----What is your motor doing not doing ?
  10. R

    Help

    Sorry mate----I can not see , hear or feel your motor.----And I do not know what you know about 12 volts and wires.-----I step aside.
  11. R

    Help

    Checked the fuse ?-----Model # of your motor ?----Is it 2 or 3 cylinder ?
  12. R

    Quit on the Water!

    Simple question ---Have you ever worked on one of these motors with the inspection port ??-----Are you saying that Johnson / Evinrude was clueless in the 50's and 60's----Note---- there is lots of room for a feeler gauge.-----Or some can eyeball 0.020" to finish a fishing trip !
  13. R

    1974 Johnson seahorse 4hp weedless running strong, then randomly dies out and takes a lot to start.

    You do some trouble shooting or take it back to the seller to help you.-----It would be an easy fix for me !!
  14. R

    1999 mercury 135hp outboard. Did these pieces shoot out of exhaust.

    Carbon from exhaust housing ??
  15. R

    1974 Johnson seahorse 4hp weedless running strong, then randomly dies out and takes a lot to start.

    Good luck with your motor.
  16. R

    1974 Johnson seahorse 4hp weedless running strong, then randomly dies out and takes a lot to start.

    I suggest you take it back.----It would be a simple fix for an expert.
  17. R

    1974 Johnson seahorse 4hp weedless running strong, then randomly dies out and takes a lot to start.

    Good spark means spark that will jump a gap of 1/4" or more on a test device.-----When you buy a motor it is a good idea to install a new impeller.----And to grease driveshaft spines.-----Pull the flywheel and have a look at the coils.
  18. R

    Quit on the Water!

    Yes , but keep in mind if your were on a fishing trip you would only need 1 screwdriver to look at the breaker points.
  19. R

    84 Evinrude bogging full throttle surge

    Some simple trouble shooting needs to be done.
  20. R

    84 Evinrude bogging full throttle surge

    Test run with another tank and hose.-----Inspect fuel pump diaphragm, a new diaphragm is cheap.----Inspect primer pump on motor.-----Replace sparkplug boots.
Top