The warning horn sounds for:
Motor over heat
Trans temp over heat
Low oil pressure
Check your oil pressure with a mechanical gauge. If it is in good shape then most often the oil pressure switch is the issue. Not saying this is your issue, but its just what happens most often.
Your motor...
Here is the A version. Check wiring and note the 2 diodes. The diodes are inline with the wire. Use a ohm meter to check continiuity to make sure doide has not opened
No
The Gi applies a ground to one side of the fuel pump relay. The other side of the coil has full time 12V
The GL has one side of the coil which is full time a ground. The other side of the coil gets 12V from the key start circuit thru a doide, and to keep it energized it comes from the...
Someone prior to you changed the wiring would be my guess. Don't see any way it would work without power going to the trim switch. I had an issue some time back and for a quick fix I ran a new wire. Later found the problem was the 3 prong plug
Don't know which are better, plan to replace some my self. I would look for current rating. Their are many that look great but won't last because of the rating
^^Agree
My Rinker is setup same way, the keel rollers are there to keep bow from hitting when toading because the bow V is deeper. Once the hull is on the bunks the rollers do not touch
Hand adjust the shoes out until you can install the drum where it barely touches. The shoes may need to be centered a bit. Once there they will self adjust as they are used
The shock on the coupler may need to be replaced
Think of a dealer somewhere between 100 to 150 an hour. Figure 4 hours plus parts
Don't know what size trailer brakes, but replacing the entire assembly is around 200 an axle and easy to replace.
The check balls make sure the manifolds are full of water and keep water from flowing back toward the thermostat housing. Once everything is full of water, they keep most of the flow going from the bottom of the manifolds cooling them first, then out thru the elbows
Without them there the...
